1. IS 15391
Cold Rolled Non-Oriented Electrical Steel Sheet and Strip - Semi-Processed Type
冷轧无取向电工钢板和钢带-半加工型
2. IS 3024
Grain orinted electrical steel sheets and strips
晶粒取向电工钢板和钢带
3. IS 2062
Hot Rolled Medium and High Tensile Structural Steel
热轧中高强度结构钢
4. IS 649
Methods for testing steel sheets for magnetic circuits of power electrical apparatus
测试电力电器设备钢板磁路方法
5. IS 11513
Hot-rolled carbon steel strip for cold rolling purposes specification
热轧碳钢带用于冷轧用途规格
6. IS 2830
Carbon steel cast billet ingots,billets,blooms and slabs for re-rolling into steel for general structural purposes – Specification
碳钢铸件坯锭，坯料，印花和厚片复压成一般结构钢材用途-规格
7. IS 648
Cold rolled non-oriented electrical steel sheet and strip - Fully processed type
冷轧无取向电工钢板和钢带-整加工型
8. IS 2831
Carbon Steel Cast Billet Ignots, Billets, Blooms and Slabs for Re-rolling into Low Tensile Structural Steel
碳钢铸件坯锭，坯料，印花和厚片复压成低强度结构钢材
9. IS 277
Galvanized Steel Sheets (Plain and Corrugated)
镀锌钢板（平整型和波纹型）
10. IS 2041
Steel Plates for Pressure Vessels Used at Moderate and Low Temperature
中低温使用的压力容器钢板
11. IS 8329
Centrifugally Cast (Spun) Ductile Iron Pressure Pipes for Water, Gas and Sewage
用于水，气体和污水流通的离心浇铸（旋转）球墨铸铁压力管道
12. IS 429
Methods for testing weight and uniformity of coatings on galvanized iron and steel wires and steel sheets
测试镀锌钢铁，铁丝和钢板重量和涂料均匀度的方法
13. IS 513
Cold reduced low carbon steel sheets and strips
低碳冷轧钢板和钢带
14. IS 1079
Hot Rolled Carbon Steel Sheet and Strip
热轧碳素钢板和钢带
15. IS 1663
Method for tensile testing of steel sheet and strip of thickness 0.5 mm to 3 mm
厚度为0.5mm-3mm的钢板和钢带的拉伸试验方法
16. IS 1663 PART 2（第二部分）
Tensile testing of steel sheet and strip: Part 2 Steel, sheet and strip of thickness above 3 mm
钢板钢带拉伸试验：第二部分 厚度超过3mm的钢板钢带
17. IS 1692
Method for simple bend testing of steel sheet and strip less than 3 mm thick
厚度小于3mm的钢板钢带的简单弯曲试验方法
18. IS 1756
Methods of modified Erichsen cupping test for steel sheet and strip
钢板钢带改良德国仪立信杯突试验方法
19. IS 2314
Steel Sheet Piling Sections
钢板桩截面
20. IS 2385
卷型热轧低碳钢板和钢带变为冷轧镀锡钢板和冷轧黑钢板
21. IS 3747
Hot rolled steel plates and sheets for flanging and pressing
镶边和压制的热轧厚钢板和薄钢板
22. IS 3972 PART 1: SEC 1
Methods of test for vitreous enamelware: Part 1 Production of specimens for testing, Section 1 Enamelled sheet steel
测试玻璃状搪瓷器皿方法：第一部分 试验试样的制备， 第一节 瓷漆钢板
23. IS 4943
Assessment of butt and fillet fusion welds in steel sheet, plate and pipe
薄钢板，厚钢板和钢管末端和角融合焊缝评估
24. IS 5522
Stainless steel sheets and strips for utensils
器具不锈钢板和钢带
25. IS 6240
Hot Rolled Steel Plate (up to 6 mm) Sheet and Strip for the Manufacture of Low Pressure Liquefiable Gas Cylinders
制造低压液化气体钢瓶的热轧厚钢板（厚6mm），薄钢板和钢条
26. IS 6911
Stainless steel plate, sheet and strip
不锈厚钢板，薄钢板和钢带
27. IS 9442
Hot rolled steel plates, sheets and strips for manufacture of agricultural tillage discs
制造农业耕作圆盘的热轧厚钢板，薄钢板和钢带
28. IS 9485
Cold-reduced and hot-rolled carbon steel sheet for porcelain enamelling
搪瓷的冷轧和热轧碳素钢板
29. IS 12093
Code of practice for laying and fixing of sloped roof coverings using plain and corrugated galvanized steel sheets
使用平整型或波纹型镀锌钢板铺设安装斜坡屋顶实施规则
30. IS 15914
High Tensile Strength Flat Rolled Steel Plate (Up To 6 mm), Sheet and Strip for the Manufacture of Welded Gas Cylinder
制造焊接气瓶的高张力平轧厚钢板（厚达6mm），薄钢板和钢带
31. IS 15961
Hot Dip Aluminium-Zinc Alloy Metallic Coated Steel Strip and Sheet (Plain)
热浸镀铝锌合金金属涂层钢带和钢板（平整型）
32. IS 15965
Pre-painted Aluminium Zinc Alloy Metallic Coated Steel Strip and Sheet (Plain)
预涂铝锌合金金属涂层钢带和钢板（平整型）
33. IS 15997
Low Nickel Austenitic Stainless Steel Sheet and Strip for Utensils and Kitchen Appliances – Specification
器具和厨房电器的低镍奥氏体不锈钢板和钢带-规格
34. IS/ISO 16160
Continuously Hot-Rolled Steel Sheet Products - Dimensional and Shape Tolerances
连续热轧钢板产品-尺寸和形状公差
35. IS/ISO 16162
Continuously cold-rolled steel sheet products - Dimensional and shape tolerances
连续冷轧钢板产品-尺寸和形状公差
36. IS/ISO 16163
Continuously Hot-Dipped Coated Steel Sheet Products - Dimensional and Shape Tolerances
连续热浸涂层钢板产品-尺寸和形状公差
| < 上页 | 下页 > |
|---|
