|
钢产品 |
||
|
1. |
IS 1785 (Part 1)：1983 |
Specification for Plain Hard-drawn Steel Wire For Pre-stressed Concrete: Part 1 Cold Drawn Stress-relieved Wire 预应力混凝土扁平硬拉钢丝规范 第一部分 冷拉应力消除钢丝 |
|
2. |
IS 1785 (Part 2): 1983 |
Plain hard-drawn steel wire for pre-stressed concrete Part 2: As drawn wire 预应力混凝土扁平硬拉钢丝规格 第二部分 冷拉钢丝 |
|
3. |
IS 6003:2010 |
Indented wire for Pre-stressed concrete 预应力混凝土刻痕钢丝规格 |
|
4. |
IS 6006:2014 |
Uncoated stress relieved strand for Pre-stressed concrete 预应力混凝土未涂层应力消失链规格 |
|
5. |
IS 13620：1993 |
Fusion bonded epoxy coated reinforcing bars 熔接环氧涂层钢筋规格 |
|
6. |
IS 14268:1995 |
Uncoated Stress Relieved Low Relaxation Seven-ply Strand For Pre-stressed Concrete 预应力混凝土未涂层应力消失低松弛七层链规格 |
|
7. |
IS 277:2018 |
Galvanized steel sheets (plain and corrugated) 镀锌钢板（平板和波纹板） |
|
8. |
IS 2002:2009 |
Steel plates for pressure vessels for intermediate and high temperature service including boilers 中高温压力容器钢板包括锅炉 |
|
9. |
IS 2041:2009 |
Steel plates for pressure vessels used at moderate and low temperature 中低温压力容器钢板 |
|
10. |
IS 2830:2012 |
Carbon steel cast billet ingots, billets, blooms and slabs for rerolling into steel for general structural purpose 一般结构用途复压钢材的碳钢铸件坯料坯锭，坯料，印花和厚片 |
|
11. |
IS 1786:2008 |
High strength deformed steel bars and wires for concrete reinforcement 混凝土配筋的高强度变形钢条和钢线 |
|
12. |
IS 648:2006 |
Cold rolled non-oriented electrical steel sheets and strip-fully processed type (CRNO) 冷轧非取向电工钢板和条状整加工型（CRNO） |
|
13. |
IS 3024:2015 |
Grain oriented electrical steel sheet & strip (CRGO) 取向电钢板及钢条（CRGO） |
|
14. |
IS 15391:2003 |
Cold Rolled Non-Oriented Electrical Steel Sheet and Strip – Semi-Processed Type 冷轧非取向电工钢板和条状半加工型（CRNO） |
|
15. |
IS 2062:2011 |
Hot rolled medium and high tensile structural steel except for bars and rods of diameter or thickness less than 6mm and structurals below(50mm x 50mm x 6mm) 热轧中高强度结构钢,除直径与厚度低于6毫米并且规格小于（50毫米x50毫米x6毫米）的钢棒 |
|
16. |
IS 432: Part 1：1982 |
Mild Steel and Medium Tensile Steel Bars and Hard-Drawn Steel Wire for Concrete Reinforcement: Part 1 Mild Steel and medium tensile steel bars 混凝土钢筋用低碳钢和中等抗拉钢柱和硬拉钢线 第一部分低碳钢和中等抗拉钢柱 |
|
17. |
IS 432: Part 2: 1982 |
Mild Steel and Medium Tensile steel bars and Hard-Drawn Steel Wire for concrete Reinforcement: Part 2 Hard-Drawn Steel Wire 混凝土钢筋用低碳钢和中等抗拉钢柱和硬拉钢线 第一部分低碳钢和中等抗拉钢柱 |
|
18. |
IS 513（Part 1）:2016 |
Cold reduced low carbon steel sheets and strip Part 1 Cold forming and drawing purpose 冷轧低碳钢板及钢带第1部分冷成型与拉伸用途 |
|
19. |
IS 432 : Part 2 : 1982 |
Cold reduced carbon steel sheets and strips Part 2 High Tensile and Multi-phase Steel冷轧碳素钢板和钢带第2部分高强度多相钢 |
|
20. |
IS 1079:2017 |
Hot Rolled Carbon Steel Sheet and Strip 热轧碳钢薄板及钢带 |
|
21. |
IS1875:1992 |
Carbon steel billets, blooms, slabs and bars for forgings.锻件用碳素钢坯料、钢坯、板坯和棒材。 |
|
22. |
IS 2879:1998 |
Mild steel for metal arc welding electrodes 低碳钢金属弧焊电焊条 |
|
23. |
IS 3502:2009 |
Steel Chequered Plates 网纹钢板 |
|
24. |
IS 5872:1990 |
Cold Rolled Steel Strips (Box Strappings) 冷轧钢条（箱式捆扎） |
|
25. |
IS 5986:2017 |
Hot Rolled Steel Sheet, Plate and Strip for Forming and Flanging purposes. 用于成形和翻边目的的热轧钢板，钢板和钢带。 |
|
26. |
IS 6240:2008 |
Hot Rolled Steel Plate (up to 6mm) Sheet and Strip for the Manufacture of Low-Pressure Liquefiable Gas Cylinders 低压液化的气体钢瓶的制造用热轧钢薄板（6mm以下）和钢条 |
|
27. |
IS 7283:1992 |
Hot Rolled Bars for production of bright bars and machined parts for engineering applications 光圆钢筋生产和工程应用已加工零件用热轧钢筋 |
|
28. |
IS 7887:1992 |
Mild steel wire rods for general engineering purposes 一般工程用低碳钢丝线材 |
|
29. |
IS 10748:2004 |
Hot Rolled Steel Strip for Welded Tubes and Pipes 焊接管材用热轧钢条 |
|
30. |
IS 11513:2017 |
Hot Rolled Carbon Steel Strip For Cold Rolling Purposes 冷压延用热轧碳钢条 |
|
31. |
IS 15647:2006 |
Hot rolled steel narrow width strip for welded tubes and pipes 焊接管材用热轧窄钢带 |
|
32. |
IS7904:2017 |
High carbon steel wire rods-specification 高碳钢线材-规范 |
|
33. |
IS14246:2013 |
Continuously pre-painted galvanized steel sheets and coils 连续彩涂镀锌钢板和钢卷 |
|
34. |
IS15965:2012 |
Pre-painted aluminum zinc alloy metallic coated steel strip and sheet(Plain) 彩涂铝锌合金镀层钢带和钢板 |
|
35. |
IS 280:2006 |
Mild steel wire for General Engineering purposes. 一般工程用软钢丝 |
|
36. |
IS 1835 : 1976 |
Round steel wire for ropes 圆钢丝钢绳 |
|
37. |
IS 3975: 1999 |
Low carbon Galvanized steel wires, formed wires and Tapes for armouring of cables. 电缆铠装用低碳镀锌钢丝，成型丝和钢带 |
|
38. |
IS 4368: 1967 |
Alloy Steel billets, blooms and slabs for forging for general engineering purposes 一般工程用锻造合金钢钢坯、方坯及厚板 |
|
39. |
IS4454(Part1): 2001 |
Steel wires for mechanical springs, Part 1 cold drawn unalloyed steel wire. 机械弹簧用钢丝第1部分冷拉非合金钢丝 |
|
40. |
IS4454(Part2): 2001 |
Steel wire for mechanical springs Part 2: oil hardened and tempered steel wire. 机械弹簧用钢丝第2部分油淬和回火钢丝 |
|
41. |
IS 4824: 2006 |
Bead Wires for Tyres 轮胎胎圈钢丝 |
|
42. |
IS11169(Part1): 1984 |
Steels for Cold Heading/Cold extrusion application Part-1 Wrought carbon and low alloy steels. 冷镦/冷挤压用钢第1部分锻碳和低合金钢 |
|
43. |
IS 11587:1986 |
Structural Weather resistant steel . 耐候结构钢 |
|
44. |
IS 15103:2002 |
Fire resistant steel-specification耐火钢-规范 |
|
45. |
IS15914:2011 |
High Tensile Strength Flat Rolled Steel Plate (Up To 6 mm), Sheet and Strip for the Manufacture of Welded Gas Cylinder. 用于焊接气瓶制造的高抗拉强度扁钢钢板(6mm及以下)，薄板和带材， |
|
46. |
IS15961:2012 |
Hot Dip aluminium – Zinc alloy metallic coated steel strip and sheet (plain). 热浸镀铝锌合金金属镀层钢带和薄板(普通钢) |
|
47. |
IS15962:2012 |
Structural Steel for Building for Structures with improved seismic Resistance. 提高抗震性能结构的建筑用结构钢 |
|
48. |
IS6527:1995 |
Stainless Steel Wire Rod. 不锈钢盘条 |
|
49. |
IS 6528 :1995 |
Stainless Steel Wire 不锈钢丝 |
|
50. |
IS 6603 : 2001 |
Stainless Steel Bars and Flats. 不锈钢棒和扁钢 |
|
51. |
IS 5522：2014 |
Stainless steel sheets and strips for utensils Specification 餐具用不锈钢板和钢带 |
|
52. |
IS 6911: 2017 |
Stainless steel plate, sheet and strip – Specification 不锈钢钢板，薄板和钢带-规范 |
|
53. |
IS15997:2012 |
Low Nickel Austenitic Stainless Steel Sheet and Strip For Utensils and Kitchen Appliances – Specification 餐具和厨房电器用低镍奥氏体不锈钢板和钢带 |
|
54. |
IS1110:1990 |
Ferrosilicon – Specification 硅铁-规范 |
|
55. |
IS4409:1973 |
Specification for Ferronickel 镍铁规范 |
|
56. |
IS 1029 : 1970 |
Specification for Hot rolled steel strip (bailing) 热轧带钢规范 |
|
57. |
IS 2385 : 1977 |
Specification for Hot-rolled mild steel sheet and strip in coil form for cold-reduced tinplate and cold-reduced black plate 冷还原马口铁和冷还原黑钢板用热轧软钢卷板及带钢-规范 |
|
58. |
IS 3039 : 1988 |
Specification for Structural steel for construction of hulls of ships 船体结构用钢规范 |
|
59. |
IS 9550 2001 |
Bright steel bars - v Specification 光亮钢棒规范 |
|
60. |
IS 3748 : 1990 |
Tool and die steels – Specification 工具和模具钢规范 |
|
61. |
IS 5517 : 1993 |
Steel for hardening and tempering – Specification 淬火和回火用钢-规范 |
|
62. |
IS 7291 : 1981 |
Specification for High speed tool steels 高速工具钢规范 |
|
63. |
IS 7494 : 1981 |
Specification for Steel for valves for internal combustion engines 内燃机用阀门钢规范 |
|
64. |
IS12146:1987 |
Specification for Carbon manganese steel forgings for pressure vessels 压力容器用碳锰钢锻件规范 |
|
65. |
IS16585:2016 |
Magnetic materials – specification for individual material – Fe based amorphous strip delivered in the semi-processed state. 磁性材料-个别材料规范-半加工状态下交货的铁基非晶带材 |
|
66. |
IS2831:2012 |
Carbon steel cast billet ingots, billets, blooms and slabs for re-rolling into structural steel (ordinary quality) – Specification 重新轧制成结构钢的碳钢铸钢坯锭、钢坯、方坯和厚板(普通质量)-规范 |
|
67. |
IS 1148: 2009 |
Steel Rivet Bars (medium And High Tensile) – For Structural Purposes 钢铆钉棒（中高强度）-结构用 |
|
68. |
IS 1673: 1984 |
Specification for Mild Steel Wire, Cold Heading Quality 低碳钢钢丝，冷镦质量规范 |
|
69. |
IS 1812: 1982 |
Specification for Carbon Steel Wire for the Manufacture of Wood Screws 木螺钉制造用碳素钢丝规范 |
|
70. |
IS 2507: 1975 |
Specification for Cold – rolled Steel Strips For Springs 弹簧用冷轧钢带规范 |
|
71. |
IS 2255: 1977 |
Specification for Mild Steel Wire Rod for the Manufacture of Machine Screws (By Cold Heading Process) 机械螺钉制造用软钢线材规范（冷镦法） |
|
72. |
IS 3195: 1992 |
Steel For the Manufacture of Volute And Helical Springs (for Railway Rolling Stock) - Specification 蜗壳和螺旋弹簧制造用钢（铁路车辆用）-规范 |
|
73. |
IS 3431: 1982 |
Specification for Steel for the manufacture of volute, helical and laminated springs for automotive suspension 汽车悬架用蜗壳，螺旋和叠片弹簧制造钢规范 |
|
74. |
IS 3885-Part- 1: 1992 |
制造叠层弹簧用钢（铁路车辆）第1部分 扁钢规范 |
|
75. |
IS 3885-Part- 2: 1992 |
Steel for the manufacture of laminated springs (railway rolling stock) Part 2: Rib and Groove Sections- Specification 制造叠层弹簧用钢（铁路车辆）第2部分 铁轨和凹槽部分 |
|
76. |
IS 4223: 1975 |
Specification for Steel Wire for Umbrella Ribs 伞骨用钢丝规范 |
|
77. |
IS 4224: 1972 |
Specification for Steel Wire for Staples, Pins And Clips 订书钉，别针和夹子用钢丝规范 |
|
78. |
IS 4397 : 1999 |
Cold-rolled Carbon Steel Strips for Ball and Roller Bearing Cages/ Retainers- Specification 滚珠和滚子轴承保持架/保持架的冷轧碳钢带规范 |
|
79. |
IS 4398 : 1994 |
Carbon-chromium Steel for the Manufacture of Balls, Rollers and Bearing Races- Specification 用于制造球，滚子和轴承座圈的碳铬钢-规范 |
|
80. |
IS 6902: 1973 |
Specification for Steel Wire for spokes 辐条钢丝规范 |
|
81. |
IS 6967: 1973 |
Specification for Steel For Electrically welded round Link Chains 电焊圆形链条用钢规范 |
|
82. |
IS 7226: 1974 |
Specification for Cold rolled medium, high carbon and low alloy steel strip for general engineering purposes 一般工程用冷轧中，高碳和低合金钢带规范 |
|
83. |
IS 7557: 1982 |
Specification for Steel Wire: (Up to 20 mm) for the manufacture of cold-forged rivets （20 mm及以下）用于冷锻铆钉制造用钢丝-规范 |
|
84. |
IS 8052 : 2006 |
Steel ingots, billets and blooms for the production of springs, rivets and screws for general engineering applications –Specification 制造一般工程应用的弹簧，铆钉和螺钉的钢锭，钢坯和大方坯–规定 |
|
85. |
IS 8951: 2001 |
Steel Cast Billet Ingots, Billets and Blooms for production of High Carbon Steel Wire Rods-Specification 制造高碳钢盘条用的铸钢坯锭，方坯和大方坯-规范 |
|
86. |
IS 8952: 1995 |
Steel ingots, blooms and billets for production of mild steel wire rods for general engineering purposes - Specification 生产一般工程用软钢线材的钢锭，大方坯和方坯-规范 |
|
87. |
IS 9476 : 1980 |
Specification for Cold rolled steel strips for carbon steel razor blades 碳钢剃须刀刀片用冷轧钢带规范 |
|
88. |
IS 9962 : 1981 |
Specification for Steel Wire for Needles 针用钢丝规格 |
|
89. |
IS 12367: 1988 |
Specification for Cold-rolled Carbon Steel Strips/ Coils for Manufacture of Welded Tubes 制造焊接管用的冷轧碳素钢带/卷规范 |
|
90. |
IS 14331: 1995 |
Steels for High Temperature Bolting Applications -Specification 高温螺栓用钢规范 |
|
91. |
IS 14491: 1997 |
Low carbon high strength cold rolled steel sheets and coils for cold forming- Specification 冷成型用低碳高强度冷轧钢板和钢卷 |
|
92. |
IS 14650:1999 |
Low carbon high strength cold rolled steel sheets and coils for cold forming- Specification 低碳高强度冷轧薄钢板和卷材-规范 |
|
93. |
IS 4882: 1979 |
Specification for Low Carbon Steel Wire for Rivets for use in Bearing Industry轴承工业用铆钉用低碳钢丝规范 |
|
94. |
IS 2090:1983 |
Specification For High Tensile Steel Bars Used In Pre-stressed Concrete 预应力混凝土用高强度钢筋规格 |
|
95. |
IS 6529:1996 |
Stainless Steel Blooms Billets And Slabs For Forging 不锈钢大方坯锻造方坯和板坯 |
|
96. |
IS 9294:1979 |
Cold-Rolled Stainless Steel Strips for Razor Blades 刀片用冷轧不锈钢带 |
|
97. |
IS 10631:1983 |
Stainless steel for welding electrode core wire 焊接用不锈钢电极芯线 |
|
98. |
IS 10631 (Part2):1983 |
Specification for Non Magnetic stainless steels for electrical applications Part 2 Specific requirements for binding wire. 电气用非磁性不锈钢规范 第2部分绑线的特殊要求 |
|
99. |
IS 10631 (Part 3):1983 |
Specification for Non Magnetic stainless steels for electrical applications Part 3 Specific requirements for sheets, strips and plates. 电气用非磁性不锈钢规范 第3部分薄板，带材和板材的特殊要求。 |
|
100. |
IS 11169 (Part2):1989 |
Steels for cold heading/ cold extrusion applications – specification Part 2 Stainless steel 冷镦钢及冷挤压用钢的使用规范 第2部分不锈钢 |
|
101. |
IS 5651:1987 |
Steels for Pneumatic Tools 气动工具用钢 |
|
102. |
IS 9516:1980 |
Heat Resisting Steels 耐热钢 |
|
103. |
IS 11952:1986 |
Steels For Piston Pins (gudgeon Pins) 活塞销用钢（活塞销） |
|
104. |
IS 12045:1987 |
Alloys Used in Electrical Resistance Metallic Heating Elements 电阻金属加热元件中使用的合金 |
|
105. |
IS 14652:1999 |
18 Percent Nickel Maraging Steel Bars and Rods 18％镍马氏体时效钢棒 |
|
106. |
IS 1566:1982 |
Specification for Hard-drawn Steel Wire Fabric For Concrete Reinforcement 钢筋混凝土用硬拉钢丝织物规范 |
|
107. |
IS 5489:1975 |
Carburizing Steels For Use in Bearing Industry 轴承行业用渗碳钢 |
|
108. |
IS 11946:1987 |
Soft Magnetic Iron Strips 软磁性铁条 |
|
109. |
IS 11947:1987 |
Soft Magnetic Iron Rods, Bars, Flats and Sections 软磁性铁棒，棒，扁钢和型材 |
|
110. |
IS 963:1958 |
Chrome molybdenum steel bars and rods for aircraft purposes 飞机用铬钼钢棒 |
|
111. |
IS 4454(Part 4):2001 |
Steel Wires for Mechanical Springs - Part 4 : Stainless Steel Wire 机械弹簧用钢丝 第4部分：不锈钢丝
|
|
112. |
IS 1993 : 2018 |
Cold-reduced Electrolytic Tin Plate 冷还原电解镀锡板 |
|
113. |
IS 12591:2018 |
Cold-reduced Electrolytic Chromium/Chromium oxide – coated steel 冷还原电解铬/氧化铬涂层钢 |
|
114. |
IS 412:1975 |
Expanded Metal Steel Sheets For General Purposes 通用钢板网 |
|
115. |
IS 2100: 1970 |
Steel Billets,Bars And Sections For Boilers 锅炉用钢坯，棒材和型材 |
|
116. |
IS 2589: 1975 |
Hard Drawn Steel Wire For Upholstery Springs 软垫弹簧用冷拔钢丝 |
|
117. |
IS 3298: 1981 |
Mild Steel Rivet Bars For Ship Building 造船用低碳钢铆钉条 |
|
118. |
IS 4072: 1975 |
Steel For Spring Washers 弹簧垫圈用钢 |
|
119. |
IS 8510 (Part II): 1977 |
Steel Wire For Banding Of Armatures And Rotors Part II Specific Requirements for magnetic banding wires 电枢和转子捆扎用钢丝第二部分磁性捆扎线的特殊要求 |
|
120. |
IS 8510 (Part III): 1977 |
Tinned Steel Wire For Banding Of Armatures And Rotors Part III Specific Requirements for non-magnetic banding wires 电枢和转子捆扎用镀锡钢丝第三部分非磁性捆扎线的特殊要求 |
|
121. |
IS 8563: 1977 |
Half Round Mild Steel Wire For The Manufacture of Split Pins 制造开口销用半圆形低碳钢丝 |
|
122. |
IS 8564: 1977 |
Steel Wire For Nipples For Spokes 辐条螺纹接头用钢丝 |
|
123. |
IS 8565: 1977 |
Heald Wire 综丝 |
|
124. |
IS 8566: 1977 |
Steel Wire For Reeds 钢筘用钢丝 |
|
125. |
IS 8917: 1978 |
Plates For Galvanizing Pots 镀锌板 |
|
126. |
IS 9442: 1980 |
Hot Rolled Steel Plates Sheets And Strips For Manufacture of Agricultural Discs 农用圆盘制造用热轧钢板和钢带 |
|
127. |
IS 9485: 1980 |
Cold-Reduced And Hot-Rolled Carbon Steel Sheet For Porcelain Enamelling 搪瓷用冷轧和热轧碳素钢板 |
|
128. |
IS 10794: 1984 |
Mild steel wire for cotter pins 开口销用低碳钢丝 |
|
129. |
IS 12262:1988 |
Trapezoidal Steel Wire For Springs Washers 弹簧垫圈用梯形钢丝 |
|
130. |
IS 12313: 1988 |
Hot-Dip Terne Coated Carbon Steel Sheets 热浸镀镀碳钢板 |
|
131. |
IS 15911:2010 |
Structural Steel (Ordinary Quality) 结构钢（一般质量） |
|
132. |
IS 4430: 1979 |
Mould Steels 模具钢 |
|
133. |
IS 4431: 1978 |
Carbon And Carbon- Manganese Free- Cutting Steels 碳和碳锰易切削钢 |
|
134. |
IS 4432: 1988 |
Case Hardening Steels 表面硬化钢 |
|
135. |
IS 5518: 1996 |
Steels For Die Blocks For Drop Forging 模锻模架用钢 |
|
136. |
IS 8748: 1978 |
Forged/Rolled CTC Segments 锻造/轧制CTC段 |
|
137. |
IS 12145: 1987 |
Quenched And Tempered Alloy Steel Forgings For Pressure Vessels 压力容器用调质合金钢锻件 |
|
138. |
IS 13387: 1992 |
Tool Steel Forgings For Metal Forming 金属成形用工具钢锻件 |
|
139. |
IS 14698:1999 |
Carbon And Low Alloy Billets, Blooms, Slabs And Bars For Manufacture Of Shell BodiesAnd Proof Shots Used In Defence Services 防务用壳体和防弹弹用碳素钢和低合金钢坯、板坯和棒材 |
|
140. |
IS/ISO 11951 : 2016 |
Cold – Reduced tinmill products – Blackplate 冷还原锡板厂产品-黑板 |
|
141. |
IS 3930: 1994 |
Flame And Induction Hardening Steels 感应淬火和火焰淬火钢 |
|
142. |
IS 5478: 1969 |
Thermostat Metal Sheet and Strip 恒温器金属薄板和带材 |
|
143. |
IS 13352: 1992 |
Stock for Forgings produced from Continuously Cast Blooms, Billets and Slabs 由连铸坯、钢坯和板坯生产的锻件用坯料 |
|
144. |
IS 16644: 2018 |
Stress-Relieved, Low Relaxation Steel Wire for Pre-stressed Concrete 预应力混凝土用应力消除低松弛钢丝 |
|
145. |
IS 17404 : 2020 |
Electrogalvanized Hot Rolled and Cold Reduced Carbon Steel Sheetsand Strips电镀锌热轧和冷轧低碳钢板和钢带 |
|
146. |
IS 8329 : 2000 |
Centrifugally cast (spun) ductile iron pressure pipes for water, gas and sewage 水、气、污水用离心铸造（旋压）球墨铸铁管 |
|
147. |
IS 9523:2000 |
水、气、污水压力管道用球墨铸铁配件 Ductile iron fittings for pressure pipes for water, gas and sewage |
|
148. |
IS 1161:2014 |
Steel tubes for structural purposes 结构用钢管 |
|
149. |
IS 1239 (Part 1):2014 |
Steel Tubes, Tubulars and Other Wrought Steel Fittings – Part 1 : Steel Tubes 钢管、管件和其他锻钢配件第1部分：钢管 |
|
150. |
IS 4270:2001 |
Steel tubes used for water-wells (upto 200 mm dia) 水井用钢管（直径小于等于200 mm） |
|
151. |
IS 9139:1979 |
Specification for Malleable iron shots and grits for use in foundries 铸造用可锻铸铁粒和沙粒规范 |
印度对钢产品强制认证清单
