IS 1785 (Part 1)：1983

Specification for Plain Hard-drawn Steel Wire For Pre-stressed Concrete: Part 1 Cold Drawn Stress-relieved Wire

预应力混凝土扁平硬拉钢丝规范 第一部分 冷拉应力消除钢丝

IS 1785 (Part 2): 1983

Plain hard-drawn steel wire for pre-stressed concrete Part 2: As drawn wire

预应力混凝土扁平硬拉钢丝规格 第二部分 冷拉钢丝

IS 6003:2010

Indented wire for Pre-stressed concrete

预应力混凝土刻痕钢丝规格

IS 6006:2014

Uncoated stress relieved strand for Pre-stressed concrete

预应力混凝土未涂层应力消失链规格

IS 13620：1993

Fusion bonded epoxy coated reinforcing bars

熔接环氧涂层钢筋规格

IS 14268:1995

Uncoated Stress Relieved Low Relaxation Seven-ply Strand For Pre-stressed Concrete

预应力混凝土未涂层应力消失低松弛七层链规格

IS 277:2003

Galvanized steel sheets (plain and corrugated)

镀锌钢板（平板和波纹板）

IS 2002:2009

Steel plates for pressure vessels for intermediate and high temperature service including boilers

中高温压力容器钢板包括锅炉

IS 2041:2009

Steel plates for pressure vessels used at moderate and low temperature

中低温压力容器钢板

IS 2830:2012

Carbon steel cast billet ingots, billets, blooms and slabs for rerolling into steel for general structural purpose

一般结构用途复压钢材的碳钢铸件坯料坯锭，坯料，印花和厚片

IS 1786:2008

High strength deformed steel bars and wires for concrete reinforcement

混凝土配筋的高强度变形钢条和钢线

IS 648:2006

Cold rolled non-oriented electrical steel sheets and strip-fully processed type (CRNO)

冷轧非取向电工钢板和条状整加工型（CRNO）

IS 3024:2015

Grain oriented electrical steel sheet & strip (CRGO)

取向电钢板及钢条（CRGO）

IS 15391:2003

Cold Rolled Non-Oriented Electrical Steel Sheet and Strip – Semi-Processed Type

冷轧非取向电工钢板和条状半加工型（CRNO）

IS 2062:2011

Hot rolled medium and high tensile structural steel except for bars and rods of diameter or thickness less than 6mm and structurals below(50mm x 50mm x 6mm)

热轧中高强度结构钢,除直径与厚度低于6毫米并且规格小于（50毫米x50毫米x6毫米）的钢棒

IS 432: Part 1：1982

Mild Steel and Medium Tensile Steel Bars and Hard-Drawn Steel Wire for Concrete Reinforcement: Part 1 Mild Steel and medium tensile steel bars

混凝土钢筋用低碳钢和中等抗拉钢柱和硬拉钢线 第一部分低碳钢和中等抗拉钢柱

IS 432: Part 2: 1982

Mild Steel and Medium Tensile steel bars and Hard-Drawn Steel Wire for concrete Reinforcement: Part 2 Hard-Drawn Steel Wire

混凝土钢筋用低碳钢和中等抗拉钢柱和硬拉钢线 第一部分低碳钢和中等抗拉钢柱

IS 513（Part 1）:2016

Cold reduced low carbon steel sheets and strip Part 1 Cold forming and drawing purpose

冷轧低碳钢板及钢带第1部分冷成型与拉伸用途

IS 513(Part-2):2016

Cold reduced carbon steel sheets and strips Part 2 High Tensile and Multi-phase Steel冷轧碳素钢板和钢带第2部分高强度多相钢

IS 1079:2017

Hot Rolled Carbon Steel Sheet and Strip

热轧碳钢薄板及钢带

IS1875:1992

Carbon steel billets, blooms, slabs and bars for forgings.锻件用碳素钢坯料、钢坯、板坯和棒材。

IS 2879:1998

Mild steel for metal arc welding electrodes

低碳钢金属弧焊电焊条

IS 3502:2009

Steel Chequered Plates

网纹钢板

IS 5872:1990

Cold Rolled Steel Strips (Box Strappings)

冷轧钢条（箱式捆扎）

IS 5986:2017

Hot Rolled Steel Sheet, Plate and Strip for Forming and Flanging purposes.

用于成形和翻边目的的热轧钢板，钢板和钢带。

IS 6240:2008

Hot Rolled Steel Plate (up to 6mm) Sheet and Strip for the Manufacture of Low-Pressure Liquefiable Gas Cylinders

低压液化的气体钢瓶的制造用热轧钢薄板（6mm以下）和钢条

IS 7283:1992

Hot Rolled Bars for production of bright bars and machined parts for engineering applications

光圆钢筋生产和工程应用已加工零件用热轧钢筋

IS 7887:1992

Mild steel wire rods for general engineering purposes

一般工程用低碳钢丝线材

IS 10748:2004

Hot Rolled Steel Strip for Welded Tubes and Pipes

焊接管材用热轧钢条

IS 11513:2017

Hot Rolled Carbon Steel Strip For Cold Rolling Purposes

冷压延用热轧碳钢条

IS 15647:2006

Hot rolled steel narrow width strip for welded tubes and pipes

焊接管材用热轧窄钢带

IS7904:2017

High carbon steel wire rods-specification

高碳钢线材-规范

IS14246:2013

Continuously pre-painted galvanized steel sheets and coils

连续彩涂镀锌钢板和钢卷

IS15965:2012

Pre-painted aluminum zinc alloy metallic coated steel strip and sheet(Plain)

彩涂铝锌合金镀层钢带和钢板

IS 280:2006

Mild steel wire for General Engineering purposes.

一般工程用软钢丝

IS 1835 : 1976

Round steel wire for ropes

圆钢丝钢绳

IS 3975: 1999

Low carbon Galvanized steel wires, formed wires and Tapes for armouring of cables.

电缆铠装用低碳镀锌钢丝，成型丝和钢带

IS 4368: 1967

Alloy Steel billets, blooms and slabs for forging for general engineering purposes

一般工程用锻造合金钢钢坯、方坯及厚板

IS4454(Part1):

2001

Steel wires for mechanical springs, Part 1 cold drawn unalloyed steel wire.

机械弹簧用钢丝第1部分冷拉非合金钢丝

IS4454(Part2):

2001

Steel wire for mechanical springs Part 2: oil hardened and tempered steel wire.

机械弹簧用钢丝第2部分油淬和回火钢丝

IS 4824: 2006

Bead Wires for Tyres

轮胎胎圈钢丝

IS11169(Part1):

1984

Steels for Cold Heading/Cold extrusion application Part-1 Wrought carbon and low alloy steels. 冷镦/冷挤压用钢第1部分锻碳和低合金钢

IS 11587:1986

Structural Weather resistant steel . 耐候结构钢

IS 15103:2002

Fire resistant steel-specification耐火钢-规范

IS15914:2011

High Tensile Strength Flat Rolled Steel Plate (Up To 6 mm), Sheet and Strip for the Manufacture of Welded Gas Cylinder. 用于焊接气瓶制造的高抗拉强度扁钢钢板(6mm及以下)，薄板和带材，

IS15961:2012

Hot Dip aluminium – Zinc alloy metallic coated steel strip and sheet (plain). 热浸镀铝锌合金金属镀层钢带和薄板(普通钢)

IS15962:2012

Structural Steel for Building for Structures with improved seismic Resistance.

提高抗震性能结构的建筑用结构钢

IS6527:1995

Stainless Steel Wire Rod.

不锈钢盘条

IS 6528 :1995

Stainless Steel Wire

不锈钢丝

IS 6603 : 2001

Stainless Steel Bars and Flats.

不锈钢棒和扁钢

IS 5522：2014

Stainless steel sheets and strips for utensils Specification

餐具用不锈钢板和钢带

IS 6911: 2017

Stainless steel plate, sheet and strip – Specification

不锈钢钢板，薄板和钢带-规范

IS15997:2012

Low Nickel Austenitic Stainless Steel Sheet and Strip For Utensils and Kitchen Appliances – Specification

餐具和厨房电器用低镍奥氏体不锈钢板和钢带

IS1110:1990

Ferrosilicon – Specification

硅铁-规范

IS4409:1973

Specification for Ferronickel

镍铁规范

IS 1029 : 1970

Specification for Hot rolled steel strip (bailing)

热轧带钢规范

IS 2385 : 1977

Specification for Hot-rolled mild steel sheet and strip in coil form for cold-reduced tinplate and cold-reduced black plate

冷还原马口铁和冷还原黑钢板用热轧软钢卷板及带钢-规范

IS 3039 : 1988

Specification for Structural steel for construction of hulls of ships

船体结构用钢规范

IS 9550 2001

Bright steel bars - v Specification

光亮钢棒规范

IS 3748 : 1990

Tool and die steels – Specification

工具和模具钢规范

IS 5517 : 1993

Steel for hardening and tempering – Specification

淬火和回火用钢-规范

IS 7291 : 1981

Specification for High speed tool steels

高速工具钢规范

IS 7494 : 1981

Specification for

Steel for valves for internal combustion engines

内燃机用阀门钢规范

IS12146:1987

Specification for

Carbon manganese steel forgings for pressure vessels

压力容器用碳锰钢锻件规范

IS16585:2016

Magnetic materials – specification for individual material – Fe based amorphous strip delivered in the semi-processed state.

磁性材料-个别材料规范-半加工状态下交货的铁基非晶带材

IS2831:2012

Carbon steel cast billet ingots, billets, blooms and slabs for re-rolling into structural steel (ordinary quality) – Specification

重新轧制成结构钢的碳钢铸钢坯锭、钢坯、方坯和厚板(普通质量)-规范

IS 1148: 2009

Steel Rivet Bars (medium And High Tensile) – For Structural Purposes

钢铆钉棒（中高强度）-结构用

IS 1673: 1984

Specification for Mild Steel Wire, Cold Heading Quality

低碳钢钢丝，冷镦质量规范

IS 1812: 1982

Specification for Carbon Steel Wire for the Manufacture of Wood Screws

木螺钉制造用碳素钢丝规范

IS 2507: 1975

Specification for Cold – rolled Steel Strips For Springs

弹簧用冷轧钢带规范

IS 2255: 1977

Specification for Mild Steel Wire Rod for the Manufacture

of Machine Screws (By Cold Heading Process)

机械螺钉制造用软钢线材规范（冷镦法）

IS 3195: 1992

Steel For the Manufacture of Volute And Helical Springs (for Railway Rolling Stock) - Specification

蜗壳和螺旋弹簧制造用钢（铁路车辆用）-规范

IS 3431: 1982

Specification for Steel for the manufacture of volute, helical and laminated springs for automotive suspension

汽车悬架用蜗壳，螺旋和叠片弹簧制造钢规范

IS 3885-Part-

1: 1992

制造叠层弹簧用钢（铁路车辆）第1部分 扁钢规范

IS 3885-Part-

2: 1992

Steel for the manufacture of laminated springs (railway rolling stock) Part 2: Rib and Groove Sections- Specification

制造叠层弹簧用钢（铁路车辆）第2部分 铁轨和凹槽部分

IS 4223: 1975

Specification for Steel Wire for Umbrella Ribs

伞骨用钢丝规范

IS 4224: 1972

Specification for Steel Wire for Staples, Pins And Clips

订书钉，别针和夹子用钢丝规范

IS 4397 : 1999

Cold-rolled Carbon Steel Strips for Ball and Roller Bearing Cages/ Retainers- Specification

滚珠和滚子轴承保持架/保持架的冷轧碳钢带规范

IS 4398 : 1994

Carbon-chromium Steel for the Manufacture of Balls, Rollers and Bearing Races- Specification

用于制造球，滚子和轴承座圈的碳铬钢-规范

IS 6902: 1973

Specification for Steel Wire for spokes

辐条钢丝规范

IS 6967: 1973

Specification for Steel For Electrically welded round Link Chains

电焊圆形链条用钢规范

IS 7226: 1974

Specification for Cold rolled medium, high carbon and low alloy steel strip for general engineering purposes

一般工程用冷轧中，高碳和低合金钢带规范

IS 7557: 1982

Specification for Steel Wire: (Up to 20 mm) for the manufacture of cold-forged rivets

（20 mm及以下）用于冷锻铆钉制造用钢丝-规范

IS 8052 : 2006

Steel ingots, billets and blooms for the production of springs, rivets and screws for general engineering applications –Specification

制造一般工程应用的弹簧，铆钉和螺钉的钢锭，钢坯和大方坯–规定

IS 8951: 2001

Steel Cast Billet Ingots, Billets and Blooms for production of High Carbon Steel Wire Rods-Specification

制造高碳钢盘条用的铸钢坯锭，方坯和大方坯-规范

IS 8952: 1995

Steel ingots, blooms and billets for production of mild steel

wire rods for general engineering purposes - Specification

生产一般工程用软钢线材的钢锭，大方坯和方坯-规范

IS 9476 : 1980

Specification for Cold rolled

steel strips for carbon steel

razor blades

碳钢剃须刀刀片用冷轧钢带规范

IS 9962 : 1981

Specification for Steel Wire for Needles

针用钢丝规格

IS 12367:

1988

Specification for Cold-rolled

Carbon Steel Strips/ Coils for

Manufacture of Welded Tubes

制造焊接管用的冷轧碳素钢带/卷规范

IS 14331:

1995

Steels for High Temperature Bolting Applications -Specification

高温螺栓用钢规范

IS 14491:

1997

Low carbon high strength cold rolled steel sheets and coils for cold forming- Specification

冷成型用低碳高强度冷轧钢板和钢卷

IS 14650:1999

Low carbon high strength cold rolled steel sheets and coils for cold forming- Specification

低碳高强度冷轧薄钢板和卷材-规范

IS 4882: 1979

Specification for Low Carbon Steel Wire for Rivets for use in Bearing Industry轴承工业用铆钉用低碳钢丝规范

IS 2090:1983

Specification For High Tensile Steel Bars Used In Pre-stressed Concrete

预应力混凝土用高强度钢筋规格

IS 6529:1996

Stainless Steel Blooms Billets And Slabs For Forging

不锈钢大方坯锻造方坯和板坯

IS 9294:1979

Cold-Rolled Stainless Steel Strips for Razor Blades

刀片用冷轧不锈钢带

IS 10631:1983

Stainless steel for welding electrode core wire

焊接用不锈钢电极芯线

IS 10632 (Part2):1983

Specification for Non Magnetic stainless steels for electrical applications

Part 2 Specific requirements for binding wire.

电气用非磁性不锈钢规范

第2部分绑线的特殊要求

IS 10632 (Part 3):1983

Specification for Non Magnetic stainless steels for electrical applications

Part 3 Specific requirements for sheets, strips and plates.

电气用非磁性不锈钢规范

第3部分薄板，带材和板材的特殊要求。

IS 11169 (Part2):1989

Steels for cold heading/ cold extrusion applications – specification

Part 2 Stainless steel

冷镦钢及冷挤压用钢的使用规范

第2部分不锈钢

IS 5651:1987

Steels for Pneumatic Tools

气动工具用钢

IS 9516:1980

Heat Resisting Steels

耐热钢

IS 11952:1986

Steels For Piston Pins (gudgeon Pins)

活塞销用钢（活塞销）

IS 12045:1987

Alloys Used in Electrical

Resistance Metallic Heating Elements

电阻金属加热元件中使用的合金

IS 14652:1999

18 Percent Nickel Maraging Steel Bars and Rods

18％镍马氏体时效钢棒

IS 1566:1982

Specification for Hard-drawn Steel Wire Fabric For Concrete

Reinforcement

钢筋混凝土用硬拉钢丝织物规范

IS 5489:1975

Carburizing Steels For Use in Bearing Industry

轴承行业用渗碳钢

IS 11946:1987

Soft Magnetic Iron Strips

软磁性铁条

IS 11947:1987

Soft Magnetic Iron Rods, Bars, Flats and Sections

软磁性铁棒，棒，扁钢和型材

IS 963:1958

Chrome molybdenum steel bars and rods for aircraft purposes

飞机用铬钼钢棒

IS 4454(Part 4):2001

Steel Wires for Mechanical

Springs - Part 4 : Stainless Steel Wire

机械弹簧用钢丝

第4部分：不锈钢丝

IS 1993 : 2018

Cold-reduced Electrolytic Tin Plate

冷还原电解镀锡板

IS 12591:2018

Cold-reduced Electrolytic Chromium/Chromium oxide – coated steel

冷还原电解铬/氧化铬涂层钢

IS 412:1975

Expanded Metal Steel Sheets For General Purposes

通用钢板网

IS 2100: 1970

Steel Billets,Bars And Sections For Boilers

锅炉用钢坯，棒材和型材

IS 2589: 1975

Hard Drawn Steel Wire For Upholstery Springs

软垫弹簧用冷拔钢丝

IS 3298: 1981

Mild Steel Rivet Bars For Ship Building

造船用低碳钢铆钉条

IS 4072: 1975

Steel For Spring Washers

弹簧垫圈用钢

IS 8510 (Part II): 1977

Steel Wire For Banding Of Armatures And Rotors Part II Specific Requirements for magnetic banding wires

电枢和转子捆扎用钢丝第二部分磁性捆扎线的特殊要求

IS 8510 (Part III): 1977

Tinned Steel Wire For Banding Of Armatures And Rotors Part III Specific Requirements for non-magnetic banding wires

电枢和转子捆扎用镀锡钢丝第三部分非磁性捆扎线的特殊要求

IS 8563: 1977

Half Round Mild Steel Wire For The Manufacture of Split Pins

制造开口销用半圆形低碳钢丝

IS 8564: 1977

Steel Wire For Nipples For Spokes

辐条螺纹接头用钢丝

IS 8565: 1977

Heald Wire

综丝

IS 8566: 1977

Steel Wire For Reeds

钢筘用钢丝

IS 8917: 1978

Plates For Galvanizing Pots

镀锌板

IS 9442: 1980

Hot Rolled Steel Plates Sheets And Strips For Manufacture of Agricultural Discs

农用圆盘制造用热轧钢板和钢带

IS 9485: 1980

Cold-Reduced And Hot-Rolled Carbon Steel Sheet For Porcelain Enamelling

搪瓷用冷轧和热轧碳素钢板

IS 10794: 1984

Mild steel wire for cotter pins

开口销用低碳钢丝

IS 12262:1988

Trapezoidal Steel Wire For Springs Washers

弹簧垫圈用梯形钢丝

IS 12313: 1988

Hot-Dip Terne Coated Carbon Steel Sheets

热浸镀镀碳钢板

IS 15911:2010

Structural Steel (Ordinary Quality)

结构钢（一般质量）

IS 4430: 1979

Mould Steels

模具钢

IS 4431: 1978

Carbon And Carbon- Manganese Free- Cutting Steels

碳和碳锰易切削钢

IS 4432: 1988

Case Hardening Steels

表面硬化钢

IS 5518: 1996

Steels For Die Blocks For Drop Forging

模锻模架用钢

IS 8748: 1978

Forged/Rolled CTC Segments

锻造/轧制CTC段

IS 12145: 1987

Quenched And Tempered Alloy Steel Forgings For Pressure Vessels

压力容器用调质合金钢锻件

IS 13387: 1992

Tool Steel Forgings For Metal Forming

金属成形用工具钢锻件

IS 14698:1999

Carbon And Low Alloy Billets, Blooms, Slabs And Bars For Manufacture Of Shell BodiesAnd Proof Shots Used In Defence Services

防务用壳体和防弹弹用碳素钢和低合金钢坯、板坯和棒材

IS/ISO 11951 : 2016

Cold – Reduced tinmill products – Blackplate

冷还原锡板厂产品-黑板

IS 3930: 1994

Flame And Induction Hardening Steels

感应淬火和火焰淬火钢

IS 5478: 1969

Thermostat Metal Sheet and Strip

恒温器金属薄板和带材

IS 13352: 1992

Stock for Forgings produced from Continuously Cast Blooms, Billets and Slabs

由连铸坯、钢坯和板坯生产的锻件用坯料

IS 16644: 2018

Stress-Relieved, Low Relaxation Steel Wire for Pre-stressed Concrete

预应力混凝土用应力消除低松弛钢丝

IS 17404 : 2020

Electrogalvanized Hot Rolled and Cold Reduced Carbon Steel Sheetsand Strips电镀锌热轧和冷轧低碳钢板和钢带

IS 8329 : 2000

Centrifugally cast (spun) ductile iron pressure pipes for water, gas and sewage

水、气、污水用离心铸造（旋压）球墨铸铁管

IS 9523:2000

水、气、污水压力管道用球墨铸铁配件

Ductile iron fittings for pressure pipes for water, gas and sewage

IS 1161:2014

Steel tubes for structural purposes

结构用钢管

IS 1239 (Part 1):2014

Steel Tubes, Tubulars and Other Wrought Steel Fittings – Part 1 : Steel Tubes

钢管、管件和其他锻钢配件第1部分：钢管

IS 4270:2001

Steel tubes used for water-wells (upto 200 mm dia)

水井用钢管（直径小于等于200 mm）

IS 9139:1979

Specification for Malleable iron shots and grits for use in foundries

铸造用可锻铸铁粒和沙粒规范