|
IS 1785 (Part 1)：1983
|
Specification for Plain Hard-drawn Steel Wire For Pre-stressed Concrete: Part 1 Cold Drawn Stress-relieved Wire
预应力混凝土扁平硬拉钢丝规范 第一部分 冷拉应力消除钢丝
|
|
IS 1785 (Part 2): 1983
|
Plain hard-drawn steel wire for pre-stressed concrete Part 2: As drawn wire
预应力混凝土扁平硬拉钢丝规格 第二部分 冷拉钢丝
|
|
IS 6003:2010
|
Indented wire for Pre-stressed concrete
预应力混凝土刻痕钢丝规格
|
|
IS 6006:2014
|
Uncoated stress relieved strand for Pre-stressed concrete
预应力混凝土未涂层应力消失链规格
|
|
IS 13620：1993
|
Fusion bonded epoxy coated reinforcing bars
熔接环氧涂层钢筋规格
|
|
IS 14268:1995
|
Uncoated Stress Relieved Low Relaxation Seven-ply Strand For Pre-stressed Concrete
预应力混凝土未涂层应力消失低松弛七层链规格
|
|
IS 277:2003
|
Galvanized steel sheets (plain and corrugated)
镀锌钢板（平板和波纹板）
|
|
IS 2002:2009
|
Steel plates for pressure vessels for intermediate and high temperature service including boilers
中高温压力容器钢板包括锅炉
|
|
IS 2041:2009
|
Steel plates for pressure vessels used at moderate and low temperature
中低温压力容器钢板
|
|
IS 2830:2012
|
Carbon steel cast billet ingots, billets, blooms and slabs for rerolling into steel for general structural purpose
一般结构用途复压钢材的碳钢铸件坯料坯锭，坯料，印花和厚片
|
|
IS 1786:2008
|
High strength deformed steel bars and wires for concrete reinforcement
混凝土配筋的高强度变形钢条和钢线
|
|
IS 648:2006
|
Cold rolled non-oriented electrical steel sheets and strip-fully processed type (CRNO)
冷轧非取向电工钢板和条状整加工型（CRNO）
|
|
IS 3024:2015
|
Grain oriented electrical steel sheet & strip (CRGO)
取向电钢板及钢条（CRGO）
|
|
IS 15391:2003
|
Cold Rolled Non-Oriented Electrical Steel Sheet and Strip – Semi-Processed Type
冷轧非取向电工钢板和条状半加工型（CRNO）
|
|
IS 2062:2011
|
Hot rolled medium and high tensile structural steel except for bars and rods of diameter or thickness less than 6mm and structurals below(50mm x 50mm x 6mm)
热轧中高强度结构钢,除直径与厚度低于6毫米并且规格小于（50毫米x50毫米x6毫米）的钢棒
|
|
IS 432: Part 1：1982
|
Mild Steel and Medium Tensile Steel Bars and Hard-Drawn Steel Wire for Concrete Reinforcement: Part 1 Mild Steel and medium tensile steel bars
混凝土钢筋用低碳钢和中等抗拉钢柱和硬拉钢线 第一部分低碳钢和中等抗拉钢柱
|
|
IS 432: Part 2: 1982
|
Mild Steel and Medium Tensile steel bars and Hard-Drawn Steel Wire for concrete Reinforcement: Part 2 Hard-Drawn Steel Wire
混凝土钢筋用低碳钢和中等抗拉钢柱和硬拉钢线 第一部分低碳钢和中等抗拉钢柱
|
|
IS 513（Part 1）:2016
|
Cold reduced low carbon steel sheets and strip Part 1 Cold forming and drawing purpose
冷轧低碳钢板及钢带第1部分冷成型与拉伸用途
|
|
IS 513(Part-2):2016
|
Cold reduced carbon steel sheets and strips Part 2 High Tensile and Multi-phase Steel冷轧碳素钢板和钢带第2部分高强度多相钢
|
|
IS 1079:2017
|
Hot Rolled Carbon Steel Sheet and Strip
热轧碳钢薄板及钢带
|
|
IS1875:1992
|
Carbon steel billets, blooms, slabs and bars for forgings.锻件用碳素钢坯料、钢坯、板坯和棒材。
|
|
IS 2879:1998
|
Mild steel for metal arc welding electrodes
低碳钢金属弧焊电焊条
|
|
IS 3502:2009
|
Steel Chequered Plates
网纹钢板
|
|
IS 5872:1990
|
Cold Rolled Steel Strips (Box Strappings)
冷轧钢条（箱式捆扎）
|
|
IS 5986:2017
|
Hot Rolled Steel Sheet, Plate and Strip for Forming and Flanging purposes.
用于成形和翻边目的的热轧钢板，钢板和钢带。
|
|
IS 6240:2008
|
Hot Rolled Steel Plate (up to 6mm) Sheet and Strip for the Manufacture of Low-Pressure Liquefiable Gas Cylinders
低压液化的气体钢瓶的制造用热轧钢薄板（6mm以下）和钢条
|
|
IS 7283:1992
|
Hot Rolled Bars for production of bright bars and machined parts for engineering applications
光圆钢筋生产和工程应用已加工零件用热轧钢筋
|
|
IS 7887:1992
|
Mild steel wire rods for general engineering purposes
一般工程用低碳钢丝线材
|
|
IS 10748:2004
|
Hot Rolled Steel Strip for Welded Tubes and Pipes
焊接管材用热轧钢条
|
|
IS 11513:2017
|
Hot Rolled Carbon Steel Strip For Cold Rolling Purposes
冷压延用热轧碳钢条
|
|
IS 15647:2006
|
Hot rolled steel narrow width strip for welded tubes and pipes
焊接管材用热轧窄钢带
|
|
IS7904:2017
|
High carbon steel wire rods-specification
高碳钢线材-规范
|
|
IS14246:2013
|
Continuously pre-painted galvanized steel sheets and coils
连续彩涂镀锌钢板和钢卷
|
|
IS15965:2012
|
Pre-painted aluminum zinc alloy metallic coated steel strip and sheet(Plain)
彩涂铝锌合金镀层钢带和钢板
|
|
IS 280:2006
|
Mild steel wire for General Engineering purposes.
一般工程用软钢丝
|
|
IS 1835 : 1976
|
Round steel wire for ropes
圆钢丝钢绳
|
|
IS 3975: 1999
|
Low carbon Galvanized steel wires, formed wires and Tapes for armouring of cables.
电缆铠装用低碳镀锌钢丝，成型丝和钢带
|
|
IS 4368: 1967
|
Alloy Steel billets, blooms and slabs for forging for general engineering purposes
一般工程用锻造合金钢钢坯、方坯及厚板
|
|
IS4454(Part1):
2001
|
Steel wires for mechanical springs, Part 1 cold drawn unalloyed steel wire.
机械弹簧用钢丝第1部分冷拉非合金钢丝
|
|
IS4454(Part2):
2001
|
Steel wire for mechanical springs Part 2: oil hardened and tempered steel wire.
机械弹簧用钢丝第2部分油淬和回火钢丝
|
|
IS 4824: 2006
|
Bead Wires for Tyres
轮胎胎圈钢丝
|
|
IS11169(Part1):
1984
|
Steels for Cold Heading/Cold extrusion application Part-1 Wrought carbon and low alloy steels. 冷镦/冷挤压用钢第1部分锻碳和低合金钢
|
|
IS 11587:1986
|
Structural Weather resistant steel . 耐候结构钢
|
|
IS 15103:2002
|
Fire resistant steel-specification耐火钢-规范
|
|
IS15914:2011
|
High Tensile Strength Flat Rolled Steel Plate (Up To 6 mm), Sheet and Strip for the Manufacture of Welded Gas Cylinder. 用于焊接气瓶制造的高抗拉强度扁钢钢板(6mm及以下)，薄板和带材，
|
|
IS15961:2012
|
Hot Dip aluminium – Zinc alloy metallic coated steel strip and sheet (plain). 热浸镀铝锌合金金属镀层钢带和薄板(普通钢)
|
|
IS15962:2012
|
Structural Steel for Building for Structures with improved seismic Resistance.
提高抗震性能结构的建筑用结构钢
|
|
IS6527:1995
|
Stainless Steel Wire Rod.
不锈钢盘条
|
|
IS 6528 :1995
|
Stainless Steel Wire
不锈钢丝
|
|
IS 6603 : 2001
|
Stainless Steel Bars and Flats.
不锈钢棒和扁钢
|
|
IS 5522：2014
|
Stainless steel sheets and strips for utensils Specification
餐具用不锈钢板和钢带
|
|
IS 6911: 2017
|
Stainless steel plate, sheet and strip – Specification
不锈钢钢板，薄板和钢带-规范
|
|
IS15997:2012
|
Low Nickel Austenitic Stainless Steel Sheet and Strip For Utensils and Kitchen Appliances – Specification
餐具和厨房电器用低镍奥氏体不锈钢板和钢带
|
|
IS1110:1990
|
Ferrosilicon – Specification
硅铁-规范
|
|
IS4409:1973
|
Specification for Ferronickel
镍铁规范
|
|
IS 1029 : 1970
|
Specification for Hot rolled steel strip (bailing)
热轧带钢规范
|
|
IS 2385 : 1977
|
Specification for Hot-rolled mild steel sheet and strip in coil form for cold-reduced tinplate and cold-reduced black plate
冷还原马口铁和冷还原黑钢板用热轧软钢卷板及带钢-规范
|
|
IS 3039 : 1988
|
Specification for Structural steel for construction of hulls of ships
船体结构用钢规范
|
|
IS 9550 2001
|
Bright steel bars - v Specification
光亮钢棒规范
|
|
IS 3748 : 1990
|
Tool and die steels – Specification
工具和模具钢规范
|
|
IS 5517 : 1993
|
Steel for hardening and tempering – Specification
淬火和回火用钢-规范
|
|
IS 7291 : 1981
|
Specification for High speed tool steels
高速工具钢规范
|
|
IS 7494 : 1981
|
Specification for
Steel for valves for internal combustion engines
内燃机用阀门钢规范
|
|
IS12146:1987
|
Specification for
Carbon manganese steel forgings for pressure vessels
压力容器用碳锰钢锻件规范
|
|
IS16585:2016
|
Magnetic materials – specification for individual material – Fe based amorphous strip delivered in the semi-processed state.
磁性材料-个别材料规范-半加工状态下交货的铁基非晶带材
|
|
IS2831:2012
|
Carbon steel cast billet ingots, billets, blooms and slabs for re-rolling into structural steel (ordinary quality) – Specification
重新轧制成结构钢的碳钢铸钢坯锭、钢坯、方坯和厚板(普通质量)-规范
|
|
IS 1148: 2009
|
Steel Rivet Bars (medium And High Tensile) – For Structural Purposes
钢铆钉棒（中高强度）-结构用
|
|
IS 1673: 1984
|
Specification for Mild Steel Wire, Cold Heading Quality
低碳钢钢丝，冷镦质量规范
|
|
IS 1812: 1982
|
Specification for Carbon Steel Wire for the Manufacture of Wood Screws
木螺钉制造用碳素钢丝规范
|
|
IS 2507: 1975
|
Specification for Cold – rolled Steel Strips For Springs
弹簧用冷轧钢带规范
|
|
IS 2255: 1977
|
Specification for Mild Steel Wire Rod for the Manufacture
of Machine Screws (By Cold Heading Process)
机械螺钉制造用软钢线材规范（冷镦法）
|
|
IS 3195: 1992
|
Steel For the Manufacture of Volute And Helical Springs (for Railway Rolling Stock) - Specification
蜗壳和螺旋弹簧制造用钢（铁路车辆用）-规范
|
|
IS 3431: 1982
|
Specification for Steel for the manufacture of volute, helical and laminated springs for automotive suspension
汽车悬架用蜗壳，螺旋和叠片弹簧制造钢规范
|
|
IS 3885-Part-
1: 1992
|
制造叠层弹簧用钢（铁路车辆）第1部分 扁钢规范
|
|
IS 3885-Part-
2: 1992
|
Steel for the manufacture of laminated springs (railway rolling stock) Part 2: Rib and Groove Sections- Specification
制造叠层弹簧用钢（铁路车辆）第2部分 铁轨和凹槽部分
|
|
IS 4223: 1975
|
Specification for Steel Wire for Umbrella Ribs
伞骨用钢丝规范
|
|
IS 4224: 1972
|
Specification for Steel Wire for Staples, Pins And Clips
订书钉，别针和夹子用钢丝规范
|
|
IS 4397 : 1999
|
Cold-rolled Carbon Steel Strips for Ball and Roller Bearing Cages/ Retainers- Specification
滚珠和滚子轴承保持架/保持架的冷轧碳钢带规范
|
|
IS 4398 : 1994
|
Carbon-chromium Steel for the Manufacture of Balls, Rollers and Bearing Races- Specification
用于制造球，滚子和轴承座圈的碳铬钢-规范
|
|
IS 6902: 1973
|
Specification for Steel Wire for spokes
辐条钢丝规范
|
|
IS 6967: 1973
|
Specification for Steel For Electrically welded round Link Chains
电焊圆形链条用钢规范
|
|
IS 7226: 1974
|
Specification for Cold rolled medium, high carbon and low alloy steel strip for general engineering purposes
一般工程用冷轧中，高碳和低合金钢带规范
|
|
IS 7557: 1982
|
Specification for Steel Wire: (Up to 20 mm) for the manufacture of cold-forged rivets
（20 mm及以下）用于冷锻铆钉制造用钢丝-规范
|
|
IS 8052 : 2006
|
Steel ingots, billets and blooms for the production of springs, rivets and screws for general engineering applications –Specification
制造一般工程应用的弹簧，铆钉和螺钉的钢锭，钢坯和大方坯–规定
|
|
IS 8951: 2001
|
Steel Cast Billet Ingots, Billets and Blooms for production of High Carbon Steel Wire Rods-Specification
制造高碳钢盘条用的铸钢坯锭，方坯和大方坯-规范
|
|
IS 8952: 1995
|
Steel ingots, blooms and billets for production of mild steel
wire rods for general engineering purposes - Specification
生产一般工程用软钢线材的钢锭，大方坯和方坯-规范
|
|
IS 9476 : 1980
|
Specification for Cold rolled
steel strips for carbon steel
razor blades
碳钢剃须刀刀片用冷轧钢带规范
|
|
IS 9962 : 1981
|
Specification for Steel Wire for Needles
针用钢丝规格
|
|
IS 12367:
1988
|
Specification for Cold-rolled
Carbon Steel Strips/ Coils for
Manufacture of Welded Tubes
制造焊接管用的冷轧碳素钢带/卷规范
|
|
IS 14331:
1995
|
Steels for High Temperature Bolting Applications -Specification
高温螺栓用钢规范
|
|
IS 14491:
1997
|
Low carbon high strength cold rolled steel sheets and coils for cold forming- Specification
冷成型用低碳高强度冷轧钢板和钢卷
|
|
IS 14650:1999
|
Low carbon high strength cold rolled steel sheets and coils for cold forming- Specification
低碳高强度冷轧薄钢板和卷材-规范
|
|
IS 4882: 1979
|
Specification for Low Carbon Steel Wire for Rivets for use in Bearing Industry轴承工业用铆钉用低碳钢丝规范
|
|
IS 2090:1983
|
Specification For High Tensile Steel Bars Used In Pre-stressed Concrete
预应力混凝土用高强度钢筋规格
|
|
IS 6529:1996
|
Stainless Steel Blooms Billets And Slabs For Forging
不锈钢大方坯锻造方坯和板坯
|
|
IS 9294:1979
|
Cold-Rolled Stainless Steel Strips for Razor Blades
刀片用冷轧不锈钢带
|
|
IS 10631:1983
|
Stainless steel for welding electrode core wire
焊接用不锈钢电极芯线
|
|
IS 10632 (Part2):1983
|
Specification for Non Magnetic stainless steels for electrical applications
Part 2 Specific requirements for binding wire.
电气用非磁性不锈钢规范
第2部分绑线的特殊要求
|
|
IS 10632 (Part 3):1983
|
Specification for Non Magnetic stainless steels for electrical applications
Part 3 Specific requirements for sheets, strips and plates.
电气用非磁性不锈钢规范
第3部分薄板，带材和板材的特殊要求。
|
|
IS 11169 (Part2):1989
|
Steels for cold heading/ cold extrusion applications – specification
Part 2 Stainless steel
冷镦钢及冷挤压用钢的使用规范
第2部分不锈钢
|
|
IS 5651:1987
|
Steels for Pneumatic Tools
气动工具用钢
|
|
IS 9516:1980
|
Heat Resisting Steels
耐热钢
|
|
IS 11952:1986
|
Steels For Piston Pins (gudgeon Pins)
活塞销用钢（活塞销）
|
|
IS 12045:1987
|
Alloys Used in Electrical
Resistance Metallic Heating Elements
电阻金属加热元件中使用的合金
|
|
IS 14652:1999
|
18 Percent Nickel Maraging Steel Bars and Rods
18％镍马氏体时效钢棒
|
|
IS 1566:1982
|
Specification for Hard-drawn Steel Wire Fabric For Concrete
Reinforcement
钢筋混凝土用硬拉钢丝织物规范
|
|
IS 5489:1975
|
Carburizing Steels For Use in Bearing Industry
轴承行业用渗碳钢
|
|
IS 11946:1987
|
Soft Magnetic Iron Strips
软磁性铁条
|
|
IS 11947:1987
|
Soft Magnetic Iron Rods, Bars, Flats and Sections
软磁性铁棒，棒，扁钢和型材
|
|
IS 963:1958
|
Chrome molybdenum steel bars and rods for aircraft purposes
飞机用铬钼钢棒
|
|
IS 4454(Part 4):2001
|
Steel Wires for Mechanical
Springs - Part 4 : Stainless Steel Wire
机械弹簧用钢丝
第4部分：不锈钢丝
|
|
IS 1993 : 2018
|
Cold-reduced Electrolytic Tin Plate
冷还原电解镀锡板
|
|
IS 12591:2018
|
Cold-reduced Electrolytic Chromium/Chromium oxide – coated steel
冷还原电解铬/氧化铬涂层钢
|
|
IS 412:1975
|
Expanded Metal Steel Sheets For General Purposes
通用钢板网
|
|
IS 2100: 1970
|
Steel Billets,Bars And Sections For Boilers
锅炉用钢坯，棒材和型材
|
|
IS 2589: 1975
|
Hard Drawn Steel Wire For Upholstery Springs
软垫弹簧用冷拔钢丝
|
|
IS 3298: 1981
|
Mild Steel Rivet Bars For Ship Building
造船用低碳钢铆钉条
|
|
IS 4072: 1975
|
Steel For Spring Washers
弹簧垫圈用钢
|
|
IS 8510 (Part II): 1977
|
Steel Wire For Banding Of Armatures And Rotors Part II Specific Requirements for magnetic banding wires
电枢和转子捆扎用钢丝第二部分磁性捆扎线的特殊要求
|
|
IS 8510 (Part III): 1977
|
Tinned Steel Wire For Banding Of Armatures And Rotors Part III Specific Requirements for non-magnetic banding wires
电枢和转子捆扎用镀锡钢丝第三部分非磁性捆扎线的特殊要求
|
|
IS 8563: 1977
|
Half Round Mild Steel Wire For The Manufacture of Split Pins
制造开口销用半圆形低碳钢丝
|
|
IS 8564: 1977
|
Steel Wire For Nipples For Spokes
辐条螺纹接头用钢丝
|
|
IS 8565: 1977
|
Heald Wire
综丝
|
|
IS 8566: 1977
|
Steel Wire For Reeds
钢筘用钢丝
|
|
IS 8917: 1978
|
Plates For Galvanizing Pots
镀锌板
|
|
IS 9442: 1980
|
Hot Rolled Steel Plates Sheets And Strips For Manufacture of Agricultural Discs
农用圆盘制造用热轧钢板和钢带
|
|
IS 9485: 1980
|
Cold-Reduced And Hot-Rolled Carbon Steel Sheet For Porcelain Enamelling
搪瓷用冷轧和热轧碳素钢板
|
|
IS 10794: 1984
|
Mild steel wire for cotter pins
开口销用低碳钢丝
|
|
IS 12262:1988
|
Trapezoidal Steel Wire For Springs Washers
弹簧垫圈用梯形钢丝
|
|
IS 12313: 1988
|
Hot-Dip Terne Coated Carbon Steel Sheets
热浸镀镀碳钢板
|
|
IS 15911:2010
|
Structural Steel (Ordinary Quality)
结构钢（一般质量）
|
|
IS 4430: 1979
|
Mould Steels
模具钢
|
|
IS 4431: 1978
|
Carbon And Carbon- Manganese Free- Cutting Steels
碳和碳锰易切削钢
|
|
IS 4432: 1988
|
Case Hardening Steels
表面硬化钢
|
|
IS 5518: 1996
|
Steels For Die Blocks For Drop Forging
模锻模架用钢
|
|
IS 8748: 1978
|
Forged/Rolled CTC Segments
锻造/轧制CTC段
|
|
IS 12145: 1987
|
Quenched And Tempered Alloy Steel Forgings For Pressure Vessels
压力容器用调质合金钢锻件
|
|
IS 13387: 1992
|
Tool Steel Forgings For Metal Forming
金属成形用工具钢锻件
|
|
IS 14698:1999
|
Carbon And Low Alloy Billets, Blooms, Slabs And Bars For Manufacture Of Shell BodiesAnd Proof Shots Used In Defence Services
防务用壳体和防弹弹用碳素钢和低合金钢坯、板坯和棒材
|
|
IS/ISO 11951 : 2016
|
Cold – Reduced tinmill products – Blackplate
冷还原锡板厂产品-黑板
|
|
IS 3930: 1994
|
Flame And Induction Hardening Steels
感应淬火和火焰淬火钢
|
|
IS 5478: 1969
|
Thermostat Metal Sheet and Strip
恒温器金属薄板和带材
|
|
IS 13352: 1992
|
Stock for Forgings produced from Continuously Cast Blooms, Billets and Slabs
由连铸坯、钢坯和板坯生产的锻件用坯料
|
|
IS 16644: 2018
|
Stress-Relieved, Low Relaxation Steel Wire for Pre-stressed Concrete
预应力混凝土用应力消除低松弛钢丝
|
|
IS 17404 : 2020
|
Electrogalvanized Hot Rolled and Cold Reduced Carbon Steel Sheetsand Strips电镀锌热轧和冷轧低碳钢板和钢带
|
|
IS 8329 : 2000
|
Centrifugally cast (spun) ductile iron pressure pipes for water, gas and sewage
水、气、污水用离心铸造（旋压）球墨铸铁管
|
|
IS 9523:2000
|
水、气、污水压力管道用球墨铸铁配件
Ductile iron fittings for pressure pipes for water, gas and sewage
|
|
IS 1161:2014
|
Steel tubes for structural purposes
结构用钢管
|
|
IS 1239 (Part 1):2014
|
Steel Tubes, Tubulars and Other Wrought Steel Fittings – Part 1 : Steel Tubes
钢管、管件和其他锻钢配件第1部分：钢管
|
|
IS 4270:2001
|
Steel tubes used for water-wells (upto 200 mm dia)
水井用钢管（直径小于等于200 mm）
|
|
IS 9139:1979
|
Specification for Malleable iron shots and grits for use in foundries
铸造用可锻铸铁粒和沙粒规范
|
