1. IS 1165 Milk powder
奶粉
2. IS 1166 Condensed milk, partly skimmed and skimmed condensed milk
炼乳，部分脱脂或全脱脂炼乳
3. IS 1656 Milk-cereal based weaning foods
牛奶谷物配方的断奶食品
4. IS 11536 Processed cereal based complementary foods for infants
婴儿加工谷物补充食品
5. IS 12176 Sweetened ultra high temperature treated condensed milk
超高温加糖炼乳
6. IS 13334(Part 1) Skimmed milk powder, standard grade
脱脂奶粉，标准等级
7. IS 13334(Part 2) Skimmed milk powder, extra grade
脱脂奶粉，特级
8. IS 14542 Partly skimmed milk powder
部分脱脂奶粉
9. IS 14433 Infant milk substitute, milk protein based
牛奶蛋白配方的婴儿代乳食品
10. IS 13428 Packaged Natural Mineral Water
包装天然矿泉水
11. IS 14534 Packaged Drinking Water (Other than Packaged Natural Mineral Water)
包装饮用水（不包括包装天然矿泉水）
12. IS 15757 Follow–up formula - complimentary foods
增补配方-补充食品
Ⅱ水泥标准
13. IS 269 33 Grade ordinary portland cement
33级普通硅酸盐水泥
14. IS 455 Portland slag cement
矿渣硅酸盐水泥
15. IS 1489(Pt 1) Portland pozzolana cement - Part 1 Fly ash based
火山灰质硅酸盐水泥-第一部分 粉煤灰质
16. IS 1489(Pt 2) Portland pozzolana cement- Part 2 Calcined clay based
火山灰质硅酸盐水泥-第二部分 焙烧粘土
17. IS 3466 Masonry cement
砌筑水泥
18. IS 6452 High alumina cement for structural use
结构用途高铝水泥
19. IS 6909 Super sulphated cement
特级硫酸盐水泥
20. IS 8041 Rapid hardening portland cement
快硬硅酸盐水泥
21. IS 8042 White portland cement
白色硅酸盐水泥
22. IS 8043 Hydrophobic portland cement
防潮硅酸盐水泥
23. IS 8112 43 Grade ordinary portland cement
43级普通硅酸盐水泥
24. IS 8229 Oil well cement
油井水泥
25. IS 12269 53 Grade ordinary portland cement
53级普通硅酸盐水泥
26. IS 12330 Sulphate resisting portland cement
抗硫硅酸盐水泥
27. IS 12600 Low heat portland Cement
低热硅酸盐水泥
Ⅲ电线，电缆电器及防护设备和配件标准
28. IS 302(Pt2/Sec3) Safety of household and similar electrical appliances -Electric iron
家用电器及相似电器安全-熨斗
29. IS 302(Pt2/Sec30) Safety of household and similar electrical appliances- Room heaters
家用电器及相似电器安全-房间取暖器
30. IS 302(Pt2/Sec-201) Safety of household and similar electrical appliances – Electric immersion water heaters
家用电器及相似电器安全-电浸热水器
31. IS 302(Pt2/Sec-202) Safety of household and similar electrical appliances - Electric stoves
家用电器及相似电器安全-电炉
32. IS 418 Tungsten filament general service electric lamps (up to 100 W)
一般用途电灯泡钨丝（达到100W）
33. IS 694 PVC insulated cables for working voltages up to and including 1100 V
工作电压1100V及以上的聚氯乙烯（PVC）绝缘电缆
34. IS 3854 Switches for domestic and similar purposes
家用或相似用途开关
35. IS 8828 Electrical accessories - Circuit breakers for over current protection for household and similar installations
电器配件-家用或相似安装电流超载保护断路器
36. IS 9968(Pt1) Elastomer insulated cables (Pt.1): For working voltages up to and including 1100 V
绝缘电缆弹性体（第一部分）：工作电压达到1100V
37. IS 12640(Pt1) Residual current operated circuit breakers for household and similar uses - Part 1 Circuit breakers without integral overcurrent protection (RCCBs)
家用或相似用途断路器操作剩余电流-第一部分 无完整过电流保护断路器（RCCBs）
38. IS 12640(Pt2) Residual current operated circuit breakers for household and similar uses – Part 2 Circuit breakers with integral overcurrent protection (RCVOs)
家用或相似用途断路器操作剩余电流-第二部分 有完整过电流保护断路器（RCVOs）
39. IS 13010 AC watt-hour meters, class 0.5, 1 & 2
交流电（AC）电度表，0.5，1和2类
40. IS 13779 AC static watt-hour meters, class 1 & 2
交流点（AC）静态电度表，1和2类
41. IS 14697 AC static transformer operated watt-hour and VAR- hour meters, class 0.2S & 0.5S
电度表和计时表操作的交流电（AC）静态变压器，0.2S和0.5S类
42. IS 15111(Pt1&Pt2) Self ballasted lamps for general lighting services Part 1 Safety requirements and Part 2 Performance requirement
一般照明用途的自镇流灯 第一部分 安全要求 第二部分 性能要求
Ⅳ多种干电池标准
43. IS 8144 Multipurpose dry batteries
多用途干电池
Ⅴ体温计标准
44. IS 3055(Pt1) clinical thermometers:part1 Solid stem type
体温计：第一部分固体干型
45. IS 3055(Pt2) Clinical thermometers : Part 2 Enclosed scale type
体温计：第二部分 内标型
Ⅵ钢管标准
46. IS 1161 Steel tubes for structural purposes
结构用途钢管
47. IS 1239(Pt1) Mild steel tubes, tubular products and other wrought steel fittings Part 1 Mild steel tubes
低碳钢管，管材及其他锻钢配件 第一部分 低碳钢管
48. IS 4270 Steel tubes used for water wells (up to 200 mm dia)
水井钢管（达到200mm）
Ⅶ煤油汽化炉标准
49. IS 1342 Oil pressure stoves
煤油汽化炉
50. IS 2787 Multi-burner oil pressure stoves
多燃烧器煤油汽化炉
51. IS 10109 Oil pressure stove, offset burner type
煤油汽化炉，抵消燃烧器型
Ⅷ溶剂提取油，脱脂食品和可食用面粉标准
52. IS 3470 Hexane, Food grade
食品级乙烷
Ⅸ气瓶标准
53. IS 3196(Pt1) Welded low carbon steel gas cylinder exceeding 5-litre water capacity for low pressure liquefiable gases Part 1 Cylinders for liquefied petroleum gas (LPG)
超过5升水容量低压液化气体的焊接低碳钢气瓶 第一部分 液化石油气钢瓶（LPG）
54. IS 3196(Pt2) Welded low carbon steel gas cylinder exceeding 5-litre water capacity for low pressure liquefiable gases Part 2 Cylinders for liquefiable gases other than LPG.
超过5升水容量低压液化气体的焊接低碳钢气瓶 第二部分 除LPG外的液化气体钢瓶
55. IS 3196(Pt4) Welded low carbon steel cylinders exceeding 5 litre Water capacity for low pressure liquefiable gases Part 4 Cylinders for toxic and corrosive gases
超过5升水容量低压液化气体的焊接低碳钢气瓶 第四部分 腐蚀性毒气体钢瓶
56. IS 3224 Valve fittings for compressed gas cylinder excluding liquefied petroleum gas cylinders
排除液化石油气钢瓶的压缩气体钢瓶的阀门配件
57. IS 3745 Yoke type valve connections for small medical gas cylinders
中小型气瓶平档圈型阀门接头
58. IS 7142Welded low carbon steel gas cylinder for low pressure liquefiable gases not exceeding 5 litre water capacit
不超过5升水容量低压液化气体的焊接低碳钢气瓶
59. IS 7285(Pt1) Refillable Seamless steel gas cylinders Part 1 Normalized steel cylinders
可反复充气的无缝钢气瓶 第一部分 正火钢气瓶
60. IS 7285(Pt2) Refillable Seamless steel gas cylinders Part 2 Quenched and tempered steel cylinders with tensile strength less than 1100 MPa (112 kgf/mm2)
可反复充气的无缝钢气瓶 第二部分 调质钢气瓶，抗张强度低于1100MPa(112 kgf/mm2)
61. IS 7302 Valve fittings for gas cylinder valves for use with breathing apparatus
装有通气设备的气瓶阀门配件
62. IS 7312 Welded and seamless steel dissolved acetylene gas cylinders
焊接无缝液化乙炔钢气瓶
63. IS 8737 Valve fittings for use with liquefied petroleum gas cylinders of more than 5 litre water capacity Part 2 Valve fittings for newly manufactured LPG cylinders
超过5升水容量的液化石油气瓶阀门配件 第二部分 最新生产LPG气瓶阀门配件
64. IS 8776 Valve fittings for use with liquefied petroleum gas cylinder up to and including 5 litre water capacity
5升水容量及以下的液化石油气瓶阀门配件
65. IS 9798 Low pressure regulators for use with liquefied petroleum gas (LPG) mixtures
伴随液化石油气体（LPG）混合物使用的低压调压器
66. IS 14899 Liquefied petroleum gas containers for automotive use
汽车液化石油气体容器
67. IS 15100 Multifunction valve assembly for permanently fixed liquefied petroleum gas (LPG) containers for automotive use
汽车永固液化石油气体（LPG）容器多功能阀门组件
Ⅹ医用诊断X射线设备标准
68. IS 7620(Pt1) Diagnostic Medical X-Ray Equipment
医用诊断X射线设备
Ⅺ奶瓶标准
69. IS 14625 Plastic Feeding Bottles
塑料奶瓶
Ⅻ环境保护标准
70. IS 10001 Constant speed compression ignition (diesel) engines for general purposes (up to 19 kW)
一般用途恒速压缩点火（柴油）发动机（19kW）
XII钢制产品标准
71. IS 1785(Pt1) Specification for plain hard-drawn steel wire for pre-stressed concrete Part 1Cold-drawn stress relieved wire
预应力混凝土扁平硬拉钢丝规格 第一部分 冷拉应力消除钢丝
72. IS 1785(Pt2) Specification for plain hard-drawn steel wire for pre-stressed concrete Part 2 As drawn wire
预应力混凝土扁平硬拉钢丝规格 第二部分 冷拉钢丝
73. IS 6003 Specification for indented wire for Pre-stressed concrete
预应力混凝土刻痕钢丝规格
74. IS 6006 Specification for uncoated stress relieved strand for Pre-stressed concrete
预应力混凝土未涂层应力消失链规格
75. IS 13620 Specification for fusion bonded epoxy coated reinforcing bars
熔接环氧涂层钢筋规格
76. IS 14268 Specification for uncoated stress relieved low relaxation seven ply strand for pre- stressed concrete
预应力混凝土未涂层应力消失低松弛七层链规格
77. IS 277 Galvanized steel sheets (plain and corrugated)
镀锌钢板（平整型和波纹型）
78. IS 2002 Steel plates for pressure vessels for intermediate and high temperature service including boilers (other than plates of thickness more than 80 mm and weight more than 12 tonne in ultrasonic tested condition; and plates of thickness less than 16 mm but width more than 4000 mm)
中高温压力容器钢板包括锅炉（不包括在超声波测试下厚度超过80mm，重量超过12公吨以及厚度小于16mm但宽度超过4000mm的钢板）
79. IS 2041 Steel plates for pressure vessels used at moderate and low temperature (other than plates of thickness more than 80 mm and weight more than 12 tonne in ultrasonic Tested condition; and plates of thickness less than 16 mm but width more than 4000 mm)
中低温压力容器钢板（不包括在超声波测试下厚度超过80mm，重量超过12公吨以及厚度小于16mm但宽度超过4000mm的钢板）
80. IS 2830 Carbon steel cast billet ingots, billets, blooms and slabs for re-rolling into steel for general structural purpose
一般结构用途复压钢材的碳钢铸件坯料坯锭，坯料，印花和厚片
81. IS 1789 High strength deformed steel bars and wires for concrete reinforcement of sizes 16 mm and above
16mm及以上混凝土配筋的高强度变形钢条和钢线
82. IS 648 Cold rolled non oriented electrical steel sheets and strip-fully processed type (CRNO)
冷轧非取向电工钢板和条状整加工型（CRNO）
83. IS 15391 Cold rolled non oriented electrical steel sheet and strip semi-processed type (CRNO)
冷轧非取向电工钢板和条状半加工型（CRNO）
84. IS 2062 Hot rolled medium and high tensile structural steel (excluding bars and rods of diameter or thickness less than 6 mm and structurals below 50 mm X 50 mm X 6 mm), other than flat rolled products (sheets/strips/ coils) less than 6 mm thickness; flat bars and rounds/squares/hexagons/octagon bars; plates of thickness more than 80 mm and weight more than 12 tonne in ultrasonic tested condition; and plates of thickness less than 16 mm but width more than 4000 mm
热轧中高强度结构钢（不包括直径或厚度小于6mm，构建低于50 mm X 50 mm X 6 mm的条或棒），不包括厚度小于6mm平面压轧产品（板/条/线圈），扁条钢和圆形/方形/六边形/八边形条钢，在超声波测试下厚度超过80mm，重量超过12公吨以及厚度小于16mm但宽度超过4000mm的钢板。
XIII球墨铸铁压力管及配件标准
85. IS 8329 Centrifugally cast (spun) ductile iron pressure pipes for water, gas and sewage
水，气体及污水流通的离心铸造（旋转）球墨铸铁压力管
86. IS 9523 Ductile iron fittings for pressure pipes for water, gas and sewage
水，气体及污水流通压力管球墨铸铁配件
XIV轮胎标准
87. IS 15627 Automotive vehicles – Pneumatic tyres for two and three-wheeled motor vehicles
机动车-两轮和三轮机动车充气轮胎
88. IS 15633 Automotive vehicles - Pneumatic tyres for passenger car vehicles – Diagonal and radial ply
机动车-乘用车充气轮胎-斜交和径向帘布层
89. IS 15636 Automotive vehicles - Pneumatic tyres for commercial vehicles - Diagonal and radial ply
机动车-商务车充气轮胎-斜交和径向帘布层
90. IS 13098 Automotive vehicles - Tubes for pneumatic tyres
机动车-充气轮胎内胎
| < 上页 | 下页 > |
|---|
