South Africa NRCS Regulations List

2013-07-11 15:19 瑞诺标准
打印
Regulations List of NRCS

No Subject Standard NO.



1 The development of national standards and other normative documents SANS 1-1

2 Requirements for the recognition of Standards Development Organizations (SDOs) in South Africa SANS 1-2

3 Lead-acid starter batteries SANS 2

4 Road vehicles—Elastomeric cups and seals for hydraulic brake actuating cylinders using a non-petroleum base hydraulic brake fluid (service temperature70 ℃ max.) SANS 205

5 Road vehicles – Elastomeric seals for hydraulic disc brake cylinders using a non-petroleum base hydraulic brake fluid (service temperature 120℃ max.) SANS 206

6 Category L motor vehicles SANS 311

7 Automotive diesel fuel SANS 342

8 Standard specification for denatured fuel ethanol for blending with gasolines for use as automotive spark-ignition engine fuel SANS 465

9 Industrial trucks –Overhead guards –Specification and testing SANS 476

10 Powered industrial trucks and tractors –Brake performance and component strength SANS 477

11 Vehicle lifts SANS 478

12 Retro-reflectors (reflex reflectors) SANS 513

13 Lights and light-signalling devices installed on motor vehicles and trailers SANS 1046

14 Interior fittings (passenger cars) SANS 1047

15 Braking — Part 1: General SANS 1051-1

16 Braking — Part 2: Response time of braking devices on vehicles fitted with compressed-air braking devices SANS 1051-2

17 Braking — Part 3: Energy sources and reservoirs SANS 1051-3

18 Braking — Part 4: Spring brakes SANS 1051-4

19 Braking — Part 5: Parking brakes: Mechanically locked brake cylinder (lock actuator) type SANS 1051-5

20 Braking — Part 6: Distribution of braking effort and compatibility of vehicles in combination SANS 1051-6

21 Motor vehicle safety: Rear underrun protection devices SANS 1055

22 Restraining devices (safety belts) for occupants of adult build in motor vehicles (Revised requirements) SANS 1080

23 Retro-reflective number plates for motor vehicles — Part 1: Blanks (metal) SANS 1116-1

24 Retro-reflective number plates for motor vehicles — Part 2: Metal SANS 1116-2

25 Retro-reflective number plates for motor vehicles — Part 3: Blanks (plastics) SANS 1116-3

26 Retro-reflective number plates for motor vehicles — Part 4: Plastics SANS 1116-4

27 Portable rechargeable fire extinguishers — Halogenated hydrocarbon type extinguishers SANS 1151

28 Safety glass for vehicles — High penetration-resistant laminated safety glass for vehicles SANS 1191

29 Laminated safety glass for vehicles SANS 1192

30 Toughened safety glass for vehicles SANS 1193

31 Braking SANS 12072

32 Cast light alloy road wheels SANS 1208

33 Devices to prevent the unauthorized use of motor vehicles (antitheft devices) SANS 1248

34 Engine cooling system protector SANS 1251

35 Motor vehicle safety: Head restraints (passenger cars) SANS 1269

36 Portable, non-refillable fire extinguishers (general purpose type) SANS 1322

37 Electrical connectors for towing and towed vehicles (7-pole connectors) SANS 1327

38 Retro-reflective and fluorescent warning signs for road vehicles — Part 1: Triangles SANS 1329-1

39 Retro-reflective and fluorescent warning signs for road vehicles — Part 2: Abnormal load vehicle signs SANS 1329-2

40 Retro-reflective and fluorescent warning signs for road vehicles — Part 3: Signs other than triangles, chevron signs and abnormal load vehicle signs SANS 1329-3

41 Retro-reflective and fluorescent warning signs for road vehicles — Part 4: Retro-reflective chevron signs SANS 1329-4

42 Retro-reflective and fluorescent warning signs for road vehicles — Part 5: Retro-reflective chevron decals SANS 1329-5

43 Lights for motor vehicles — Part 1: Incandescent lamps SANS 1376-1

44 Lights for motor vehicles — Part 2: Headlights SANS 1376-2

45 Lights for motor vehicles — Part 3: Secondary lights SANS 1376-3

46 Replacement silencing systems for motor vehicles SANS 1428

47 Strength of seats and of their anchorages SANS 1429

48 Anchorages for restraining devices SANS 1430

49 The rear-view mirrors of motor vehicles SANS 1436

50 Automotive upholstery fabrics SANS 1439

51 The steering mechanism of motor vehicles (Category M1 only): Behaviour on impact SANS 1440

52 Speedometer equipment on motor vehicles SANS 1441

53 Door latches and hinges SANS 1443

54 Braking (motor and towed vehicles, designed for low speed or for use off public roads) — Part 1: Low speed vehicles SANS 1447-1

55 Braking (motor and towed vehicles, designed for low speed or for use off public roads) — Part 2: Low speed trailers SANS 1447-2

56 Roll-over protection structures for wheeled agricultural or forestry tractors (static testing) SANS 1468

57 Plastics safety glazing materials for motor vehicles SANS 1472

58 Pneumatic braking system connections between drawing and drawn vehicles — Part 1: Contact type couplings SANS 1477-1

59 Pneumatic braking system connections between drawing and drawn vehicles — Part 2: Palm type couplings SANS 1477-2

60 Pneumatic braking system connections between drawing and drawn vehicles — Part 3: The arrangement of connections on vehicles, using contact type or palm type couplings SANS 1477-3

61 Wheel flaps fitted to motor vehicles SANS 1496

62 Ball type couplings and towing brackets for towing caravans and light trailers — Part 1: Towing brackets and integrated towing devices SANS 1505-1

63 Ball type couplings and towing brackets for towing caravans and light trailers — Part 2: Coupling balls and ball supports SANS 1505-2

64 Ball type couplings and towing brackets for towing caravans and light trailers — Part 3: Coupling sockets SANS 1505-3

65 High performance engine lubricating oil for petrol engines (for API Service Category SJ) SANS 1516

66 High performance engine lubricating oil for diesel engines (for API Service Category CH-4) SANS 1517

67 Transport of dangerous goods — Design requirements for road vehicles and portable tanks SANS 15186

68 Road signs — Part 1: Retro-reflective sheeting material SANS 1519-1

69 Road signs — Part 2: Performance requirements for road signs SANS 1519-2

70 Motor vehicle tyres and rims — Dimensions and loads — Part 1: General SANS 1550-1

71 Motor vehicle tyres and rims — Dimensions and loads — Part 2: Passenger car tyres SANS 1550-2

72 Motor vehicle tyres and rims — Dimensions and loads — Part 3: Commercial vehicle tyres SANS 1550-3

73 Motor vehicle tyres and rims — Dimensions and loads — Part 4: Motorcycle and scooter tyres SANS 1550-4

74 Motor vehicle tyres and rims — Dimensions and loads — Part 5: Off-the-road vehicle tyres SANS 1550-5

75 Motor vehicle tyres and rims — Dimensions and loads — Part 6: Agricultural vehicle tyres SANS 1550-6

76 Motor vehicle tyres and rims — Dimensions and loads — Part 7: Industrial vehicle tyres SANS 1550-7

77 Motor vehicle tyres and rims — Dimensions and loads — Part 10: Rim contours SANS 1550-10

78 On-board computers for road transport SANS 1552

79 Tachograph recording equipment installed in road transport (excluding on-board computers) SANS 1558

80 The strength of large passenger vehicle superstructures (rollover protection) SANS 1563

81 The strength of seats (and their anchorages) of large passenger buses SANS 1564

82 Pneumatic tyres for passenger cars and trailers SANS 1565

83 Pneumatic tyres for commercial vehicles and trailers SANS 1566

84 Temporary-use spare wheels/tyres SANS 1577

85 Protection equipment for the front of motor vehicles SANS 1587

86 The braking performance of trackless underground mining vehicles — Load haul dumpers and dump trucks SANS 1589

87 Unleaded petrol SANS 1598

88 New replacement brake drums for motor vehicles SANS 1622

89 Warning lights SANS 1670

90 Safety aspects of canopies as fitted to category N1 and N2 motor vehicles SANS 1708

91 Lubricating grease SANS 1851

92 Hydraulic brake and clutch fluid (DOT 4 equivalent) SANS 1905

93 Portable refillable fire extinguishers SANS 1910

94 National modifications to SANS 20109: "Uniform provisions concerning the approval for the production of retreaded pneumatic tyres for commercial vehicles and their trailers" SANS 1925

95 Automotive biodiesel fuel SANS 1935

96 Road vehicles — Vehicle identification number (VIN) — Content and structure SANS 3779

97 Road vehicles — World manufacturer identifier (WMI) code SANS 3780

98 Road vehicles — Wheels/rims for commercial vehicles — Test methods SANS 3894

99 Road vehicles — Vehicle identification number (VIN) — Location and attachment SANS 4030

100 Road vehicles — Connectors for the electrical connection of towing and towed vehicles — Definitions, tests and requirements SANS 4091

101 Road vehicles — Elastomeric cups and seals for cylinders for hydraulic braking systems using a non-petroleum base hydraulic brake fluid (service temperature 120 °C max.) SANS 4928

102 Road vehicles — Elastomeric seals for hydraulic disc brake cylinders using a non-petroleum base hydraulic brake fluid (service temperature 150 °C max.) SANS 4930

103 The determination of performance (at net power) of internal combustion engines — Part 1: Road vehicle internal combustion engines at sea level SANS 10013-1

104 The determination of performance (at net power) of internal combustion engines — Part 2: Compression ignition engines at altitude SANS 10013-2

105 The determination of performance (at net power) of internal combustion engines — Part 3: Agricultural vehicle internal combustion engines at sea level SANS 10013-3

106 The testing of motor vehicles for roadworthiness SANS 10047

107 The measurement and assessment of occupational noise for hearing conservation purposes SANS 10083

108 Measurement and calibration systems SANS 10159

109 The installation of restraining devices (safety belts) in motor vehicles SANS 10168

110 Determining the performance of audible warning devices (hooters) after installation in a motor vehicle SANS 10169

111 The measurement of noise emitted by road vehicles when stationary SANS 10181

112 The measurement of noise emitted by motor vehicles in motion SANS 10205

113 The measurement of noise inside motor vehicles SANS 10211

114 Vehicle test station evaluation SANS 10216

115 The determination of performance (at net power) of industrial internal combustion engines — Part 1: Standard reference conditions and declarations of power, fuel consumption and lubricating oil consumption SANS 10219-1

116 The determination of performance (at net power) of industrial internal combustion engines — Part 2: Test methods SANS 10219-2

117 The determination of performance (at net power) of industrial internal combustion engines — Part 3: Test measurements SANS 10219-3

118 The determination of performance (at net power) of industrial internal combustion engines — Part 4: Speed governing SANS 10219-4

119 The determination of performance (at net power) of industrial internal combustion engines — Part 5: Torsional vibrations SANS 10219-5

120 The determination of performance (at net power) of industrial internal combustion engines — Part 6: Overspeed protection SANS 10219-6

121 The identification and classification of dangerous goods for transport SANS 10228

122 Transportation of dangerous goods — Operational requirements for road vehicles SANS 10231

123 Homologation of motor vehicle models SANS 10267

124 Engine speed (S values), reference sound levels and permissible sound levels of stationary road vehicles SANS 10281

125 The manufacture and reconditioning of replacement brake lining assemblies SANS 10310

126 The registration of manufacturers, importers and builders of categories M, N and O motor vehicles SANS 10319

127 Quality management systems — Requirements for bus operators SANS 10399

128 Repairs to tyres for motor vehicles SANS 10408

129 Road vehicles — Connectors for the electrical connection of towing and towed vehicles — 13-pole connectors for vehicles with 12 V nominal supply voltage SANS 11446

130 Road vehicles — Connectors for the electrical connection of towing and towed vehicles — 15-pole connector for vehicles with 24 V nominal supply voltage SANS 12098

131 Quality management systems — Particular requirements for the application of ISO 9001:2000 for automotive production and relevant service part organizations SANS 16949

132 General requirements for the competence of testing and calibration laboratories SANS 170254

133 Uniform provisions concerning the approval of motor vehicle headlamps emitting an asymmetrical passing beam and/or a driving beam and equipped with filament lamps of categories R2 and/or HS1 SANS 20001

134 Uniform provisions concerning the approval of retro-reflecting devices for power-driven vehicles and their trailers SANS 20003

135 Uniform provisions for the approval of devices for the illumination of rear registration plates of motor vehicles (except motor cycles) and their trailers SANS 20004

136 Uniform provisions for the approval of motor vehicle "sealed beam" headlamps (SB) emitting a European asymmetrical passing beam or a driving beam or both SANS 20005

137 Uniform provisions concerning the approval of direction indicators for motor vehicles and their trailers SANS 20006

138 Uniform provisions concerning the approval of front and rear position (side) lamps, stop-lamps and end-outline marker lamps for motor vehicles (except motorcycles) and their trailers SANS 20007

139 Uniform provisions concerning the approval of motor vehicle headlamps emitting an asymmetrical passing beam or a driving beam or both and equipped with halogen filament lamps (H1, H2, H3, HB3, HB4, H7, H8, H9, HIR1 and/or HIR2) SANS 20008

140 Uniform provisions concerning the approval of vehicles with regard to electromagnetic compatibility SANS 20010

141 Uniform provisions concerning the approval of vehicles with regard to door latches and door retention components SANS 20011

142 Uniform provisions concerning the approval of vehicles with regard to the protection of the driver against the steering mechanism in the event of impact SANS 20012

143 Uniform provisions concerning the approval of vehicles of categories M, N and O with regard to braking SANS 20013

144 Uniform provisions concerning the approval of passenger cars with regard to braking SANS 20013-H

145 Uniform provisions concerning the approval of vehicles with regard to safety-belt anchorages SANS 20014

146 Uniform provisions concerning the approval of safety-belts and restraint systems for adult occupants of power-driven vehicles SANS 20016

147 Uniform provisions concerning the approval of vehicles with regard to the seats, their anchorages and any head restraints SANS 20017

148 Uniform provisions concerning the approval of motor vehicle front fog lamps SANS 20019

149 Uniform provisions concerning the approval of motor vehicle headlamps emitting an asymmetrical passing beam or a driving beam or both and equipped with halogen filament lamps (H4 lamps) SANS 20020

150 Uniform provisions concerning the approval of vehicles with regard to their interior fittings SANS 20021

151 Uniform provisions concerning the approval of protective helmets and of their visors for drivers and passengers of motor cycles and mopeds SANS 20022

152 Uniform provisions concerning the approval of reversing lamps for power-driven vehicles and their trailers SANS 20023

153 Uniform provisions for the approval of advance-warning triangles SANS 20027

154 Uniform provisions for the approval of audible warning devices and of motor vehicles with regard to their audible signals SANS 20028

155 Uniform provisions concerning the approval of halogen sealedbeam unit (HSB unit) motor vehicle headlamps emitting an asymmetrical passing beam or a driving beam or both SANS 20031

156 Uniform provisions concerning the approval of large passenger vehicles with regard to their general construction SANS 20036

157 Uniform provisions concerning the approval of filament lamps for use in approved lamp units of power driven vehicles and of their trailers SANS 20037

158 Uniform provisions concerning the approval of vehicles with regard to the speedometer equipment including its installation SANS 20039

159 Uniform provisions concerning the approval of motorcycles equipped with a positive-ignition engine with regard to the emission of gaseous pollutants by the engine SANS 20040

160 Uniform provisions concerning the approval of safety glazing materials SANS 20043

161 Uniform provisions concerning the approval of restraining devices for child occupants of power-driven vehicles ("child restraint system") SANS 200448

162 Uniform provisions concerning the approval of rear-view mirrors, and of motor vehicles with regard to the installation of rear-view mirrors SANS 20046

163 Uniform provisions concerning the approval of mopeds equipped with a positive-ignition engine with regard to the emission of gaseous pollutants by the engine SANS 20047

164 Uniform provisions concerning the approval of vehicles with regard to the installation of lighting and light-signalling devices SANS 20048

165 Uniform provisions concerning the approval of compression ignition (C.I.) and natural gas (NG) engines as well as positive ignition (P.I.) engines fuelled with liquefied petroleum gas (LPG) and vehicles equipped with C.I. and NG engines and P.I. engines fuelled with LPG, with regard to the emissions of pollutants by the engine SANS 20049

166 Uniform provisions concerning the approval of front position lamps, rear position lamps, stop lamps, direction indicators and rear-registration-plate illuminating devices for mopeds, motor cycles and vehicles treated as such SANS 20050

167 Uniform provisions concerning the approval of M2 and M3 small capacity vehicles with regard to their general construction SANS 20052

168 Uniform provisions concerning the approval of category L3 vehicles with regard to the installation of lighting and light signalling devices SANS 20053

169 Uniform provisions concerning the approval of mechanical coupling components of combinations of vehicles SANS 200556

170 Uniform provisions concerning the approval of headlamps for mopeds and vehicles treated as such SANS 20056

171 Uniform provisions concerning the approval of headlamps for motor cycles and vehicles treated as such SANS 20057

172 Uniform provisions concerning the approval of replacement silencing systems SANS 20059

173 Uniform provisions concerning the approval of two-wheeled motor cycles and mopeds with regard to driver-operated controls including the identification of controls, tell-tales and indicators SANS 20060

174 Uniform provisions concerning the approval of power-driven vehicles with handlebars with regard to their protection against unauthorized use SANS 20062

175 Uniform provisions concerning the approval of two-wheeled mopeds with regard to noise SANS 20063

176 Uniform provisions concerning the approval of special warning lamps for power-driven vehicles and their trailers SANS 20065

177 Uniform provisions concerning: I) approval of specific equipment of motor vehicles using liquefied petroleum gases in their propulsion system; II) approval of a vehicle fitted with specific equipment for the use of liquefied petroleum gases in its propulsion system with regard to the installation of such equipment SANS 20067

178 Uniform provisions concerning the approval of rear marking plates for slow-moving vehicles (by construction) and their trailers SANS 20069

179 Uniform provisions concerning the approval of rear marking plates for heavy and long vehicles SANS 20070

180 Uniform provisions concerning the approval of motor cycle headlamps emitting an asymmetrical passing beam and a driving beam and equipped with halogen filament lamps (HS1) SANS 20072

181 Uniform provisions concerning the approval of goods vehicles, trailers and semi-trailers with regard to their lateral protection SANS 20073

182 Uniform provisions concerning the approval of category L1 vehicles with regard to the installation of lighting and light signalling devices SANS 20074

183 Uniform provisions concerning the approval of pneumatic tyres for motor cycles and mopeds SANS 20075

184 Uniform provisions concerning the approval of headlamps for mopeds emitting a driving beam and a passing beam SANS 20076

185 Uniform provisions concerning the approval of vehicles of category L with regard to braking SANS 20078

186 Uniform provisions concerning the approval of seats of large passenger vehicles and of these vehicles with regard to the strength of the seats and their anchorages SANS 20080

187 Uniform provisions concerning the approval of rear-view mirrors and of two-wheeled power-driven vehicles with or without side car, with regard to the installation of rear-view mirrors on handlebars SANS 20081

188 Uniform provisions concerning the approval of moped headlamps equipped with filament halogen lamps (HS2 lamps) SANS 20082

189 Uniform provisions concerning the approval of vehicles with regard to the emission of pollutants according to engine fuel requirements SANS 20083

190 Uniform provisions concerning the approval of passenger cars equipped with an internal combustion engine with regard to measurement of fuel consumption SANS 20084

191 Uniform provisions concerning the approval of agricultural or forestry tractors with regard to the installation of lighting and light-signalling devices SANS 20086

192 Uniform provisions concerning the approval of daytime running lamps for power-driven vehicles SANS 20087

193 Uniform provisions concerning the approval of retroreflective tyres for two-wheeled vehicles SANS 20088

194 Uniform prescriptions for approval of: I. Vehicles with regard to limitation of their maximum speed or their adjustable speed limitation function; II. Vehicles with regard to the installation of a speed limiting device (SLD) or adjustable speed limitation device (ASLD) of an approved type;III. Speed limitation devices (SLD) and adjustable speed limitation device (ASLD) SANS 20089

195 Uniform provisions concerning the approval of replacement brake lining assemblies and drum brake linings for power-driven vehicles and their trailers SANS 20090

196 Uniform provisions concerning the approval of side-marker lamps for motor vehicles and their trailers SANS 20091

197 Uniform provisions concerning the approval of compression ignition (C.I.) engines to be installed in agricultural and forestry tractors and in non-road mobile machinery with regard to the emissions of pollutants by the engine SANS 20096

198 Uniform provisions concerning the approval of motor vehicle headlamps equipped with gas-discharge light sources SANS 20098

199 Uniform provisions concerning the approval of gas-discharge light sources for use in approved gas-discharge lamp units of power-driven vehicles SANS 20099

200 Uniform provisions concerning the approval of passenger cars powered by an internal combustion engine only, or powered by a hybrid electric power train with regard to the measurement of the emission of carbon dioxide and fuel consumption and/or the measurement of electric energy consumption and electric range, and of categories M1 and N1 vehicles powered by an electric power train only with regard to the measurement of electric energy consumption and electric range SANS 20101

201 Uniform provisions concerning the approval of retro-reflective markings for heavy and long vehicles and their trailers. SANS 20104

202 Uniform provisions concerning the approval of double-deck large passenger vehicles with regard to their general construction SANS 20107

203 Uniform provisions concerning the approval for the production of retreaded pneumatic tyres for motor vehicles and their trailers SANS 20108

204 Uniform provisions concerning the approval for the production of retreaded pneumatic tyres for commercial vehicles and their trailers SANS 20109

205 Uniform provisions concerning the approval of: SANS 20110
I. Specific components of motor vehicles using compressed natural gas (CNG) in their propulsion system;II. Vehicles with regard to the installation of specific components of an approved type for the use of compressed natural gas (CNG) in their propulsion system

206 Uniform provisions concerning the approval of tank vehicles of categories N and O with regard to rollover stability SANS 20111

207 Uniform provisions concerning the approval of motor vehicle headlamps emitting an asymmetrical passing beam or a driving beam or both and equipped with filament lamps SANS 20112

208 Uniform provisions concerning the approval of wheels for passenger cars and their trailers SANS 20124

209 Industrial trucks — Specifications and test methods for operator restraint systems — Part 1: Lap-type seat belts SANS 24135-1

210 Lead-acid starter batteries — Part 1: General requirements and methods of test SANS 60095-1

211 Lead-acid starter batteries — Part 2: Dimensions of batteries and dimensions and marking of terminals SANS 60095-2

212 The care, maintenance and use of motor vehicle tyres and rims (incorporating TREDCO guidelines) ARP 007

213 Compulsory Specification for motor vehicles of category M1 VC 8022

214 Compulsory Specification for motor vehicles of category M2 and M3 VC 8023

215 Compulsory Specification for motor vehicles of category N1 VC 8024

216 Compulsory Specification for motor vehicles of category N2 and N3 VC 8025

217 Compulsory Specification for category O1 and O2 vehicles (caravans and light trailers) VC 8026

218 Compulsory Specification for category O3 and O4 vehicles (trailers) VC 8027

219 Compulsory Specification for child restraints for use in motor vehicles VC 8033

220 Compulsory Specification for replacement incandescent lamps for motor vehicles VC 8048

221 Compulsory Specification for replacement headlights for motor vehicles VC 8049

222 Compulsory Specification for replacement secondary lights for motor vehicles VC 8050

223 Compulsory Specification for replacement safety glass for use in road vehicles VC 8051

224 Compulsory Specification for replacement brake lining assemblies for road vehicles VC 8053

225 Compulsory Specification for pneumatic tyres for passenger cars and their trailers VC 8056

226 Compulsory Specification for slow speed vehicles VC 8057

227 Compulsory Specification for pneumatic tyres for commercial vehicles and their trailers VC 8059

228 Compulsory Specification for retro-reflective number plates for motor vehicles VC 8062

229 Compulsory Specification for ball type couplings and towing brackets for towing caravans and light trailers VC 8065

230 Compulsory Specification for material for contour marking on motor vehicles VC 8078

231 Compulsory Specification for replacement elastomeric cups and seals for hydraulic brake actuating cylinders for use in motor vehicles using non-petroleum base hydraulic brake fluid (service temperature 70 °C to 150 °C max) VC 8080

232 Standards Act, 1993 (Act 29 of 1993) Standards Act

< 上页   下页 >