Regulations List of NRCS |
|
No |
Subject |
Standard NO. |
|
|
|
1 |
The development of national standards and other normative documents |
SANS 1-1 |
|
|
2 |
Requirements for the recognition of Standards Development Organizations (SDOs) in South Africa |
SANS 1-2 |
|
|
3 |
Lead-acid starter batteries |
SANS 2 |
|
|
4 |
Road vehicles—Elastomeric cups and seals for hydraulic brake actuating cylinders using a non-petroleum base hydraulic brake fluid (service temperature70 ℃ max.) |
SANS 205 |
|
|
5 |
Road vehicles – Elastomeric seals for hydraulic disc brake cylinders using a non-petroleum base hydraulic brake fluid (service temperature 120℃ max.) |
SANS 206 |
|
|
6 |
Category L motor vehicles |
SANS 311 |
|
|
7 |
Automotive diesel fuel |
SANS 342 |
|
|
8 |
Standard specification for denatured fuel ethanol for blending with gasolines for use as automotive spark-ignition engine fuel |
SANS 465 |
|
|
9 |
Industrial trucks –Overhead guards –Specification and testing |
SANS 476 |
|
|
10 |
Powered industrial trucks and tractors –Brake performance and component strength |
SANS 477 |
|
|
11 |
Vehicle lifts |
SANS 478 |
|
|
12 |
Retro-reflectors (reflex reflectors) |
SANS 513 |
|
|
13 |
Lights and light-signalling devices installed on motor vehicles and trailers |
SANS 1046 |
|
|
14 |
Interior fittings (passenger cars) |
SANS 1047 |
|
|
15 |
Braking — Part 1: General |
SANS 1051-1 |
|
|
16 |
Braking — Part 2: Response time of braking devices on vehicles fitted with compressed-air braking devices |
SANS 1051-2 |
|
|
17 |
Braking — Part 3: Energy sources and reservoirs |
SANS 1051-3 |
|
|
18 |
Braking — Part 4: Spring brakes |
SANS 1051-4 |
|
|
19 |
Braking — Part 5: Parking brakes: Mechanically locked brake cylinder (lock actuator) type |
SANS 1051-5 |
|
|
20 |
Braking — Part 6: Distribution of braking effort and compatibility of vehicles in combination |
SANS 1051-6 |
|
|
21 |
Motor vehicle safety: Rear underrun protection devices |
SANS 1055 |
|
|
22 |
Restraining devices (safety belts) for occupants of adult build in motor vehicles (Revised requirements) |
SANS 1080 |
|
|
23 |
Retro-reflective number plates for motor vehicles — Part 1: Blanks (metal) |
SANS 1116-1 |
|
|
24 |
Retro-reflective number plates for motor vehicles — Part 2: Metal |
SANS 1116-2 |
|
|
25 |
Retro-reflective number plates for motor vehicles — Part 3: Blanks (plastics) |
SANS 1116-3 |
|
|
26 |
Retro-reflective number plates for motor vehicles — Part 4: Plastics |
SANS 1116-4 |
|
|
27 |
Portable rechargeable fire extinguishers — Halogenated hydrocarbon type extinguishers |
SANS 1151 |
|
|
28 |
Safety glass for vehicles — High penetration-resistant laminated safety glass for vehicles |
SANS 1191 |
|
|
29 |
Laminated safety glass for vehicles |
SANS 1192 |
|
|
30 |
Toughened safety glass for vehicles |
SANS 1193 |
|
|
31 |
Braking |
SANS 12072 |
|
|
32 |
Cast light alloy road wheels |
SANS 1208 |
|
|
33 |
Devices to prevent the unauthorized use of motor vehicles (antitheft devices) |
SANS 1248 |
|
|
34 |
Engine cooling system protector |
SANS 1251 |
|
|
35 |
Motor vehicle safety: Head restraints (passenger cars) |
SANS 1269 |
|
|
36 |
Portable, non-refillable fire extinguishers (general purpose type) |
SANS 1322 |
|
|
37 |
Electrical connectors for towing and towed vehicles (7-pole connectors) |
SANS 1327 |
|
|
38 |
Retro-reflective and fluorescent warning signs for road vehicles — Part 1: Triangles |
SANS 1329-1 |
|
|
39 |
Retro-reflective and fluorescent warning signs for road vehicles — Part 2: Abnormal load vehicle signs |
SANS 1329-2 |
|
|
40 |
Retro-reflective and fluorescent warning signs for road vehicles — Part 3: Signs other than triangles, chevron signs and abnormal load vehicle signs |
SANS 1329-3 |
|
|
41 |
Retro-reflective and fluorescent warning signs for road vehicles — Part 4: Retro-reflective chevron signs |
SANS 1329-4 |
|
|
42 |
Retro-reflective and fluorescent warning signs for road vehicles — Part 5: Retro-reflective chevron decals |
SANS 1329-5 |
|
|
43 |
Lights for motor vehicles — Part 1: Incandescent lamps |
SANS 1376-1 |
|
|
44 |
Lights for motor vehicles — Part 2: Headlights |
SANS 1376-2 |
|
|
45 |
Lights for motor vehicles — Part 3: Secondary lights |
SANS 1376-3 |
|
|
46 |
Replacement silencing systems for motor vehicles |
SANS 1428 |
|
|
47 |
Strength of seats and of their anchorages |
SANS 1429 |
|
|
48 |
Anchorages for restraining devices |
SANS 1430 |
|
|
49 |
The rear-view mirrors of motor vehicles |
SANS 1436 |
|
|
50 |
Automotive upholstery fabrics |
SANS 1439 |
|
|
51 |
The steering mechanism of motor vehicles (Category M1 only): Behaviour on impact |
SANS 1440 |
|
|
52 |
Speedometer equipment on motor vehicles |
SANS 1441 |
|
|
53 |
Door latches and hinges |
SANS 1443 |
|
|
54 |
Braking (motor and towed vehicles, designed for low speed or for use off public roads) — Part 1: Low speed vehicles |
SANS 1447-1 |
|
|
55 |
Braking (motor and towed vehicles, designed for low speed or for use off public roads) — Part 2: Low speed trailers |
SANS 1447-2 |
|
|
56 |
Roll-over protection structures for wheeled agricultural or forestry tractors (static testing) |
SANS 1468 |
|
|
57 |
Plastics safety glazing materials for motor vehicles |
SANS 1472 |
|
|
58 |
Pneumatic braking system connections between drawing and drawn vehicles — Part 1: Contact type couplings |
SANS 1477-1 |
|
|
59 |
Pneumatic braking system connections between drawing and drawn vehicles — Part 2: Palm type couplings |
SANS 1477-2 |
|
|
60 |
Pneumatic braking system connections between drawing and drawn vehicles — Part 3: The arrangement of connections on vehicles, using contact type or palm type couplings |
SANS 1477-3 |
|
|
61 |
Wheel flaps fitted to motor vehicles |
SANS 1496 |
|
|
62 |
Ball type couplings and towing brackets for towing caravans and light trailers — Part 1: Towing brackets and integrated towing devices |
SANS 1505-1 |
|
|
63 |
Ball type couplings and towing brackets for towing caravans and light trailers — Part 2: Coupling balls and ball supports |
SANS 1505-2 |
|
|
64 |
Ball type couplings and towing brackets for towing caravans and light trailers — Part 3: Coupling sockets |
SANS 1505-3 |
|
|
65 |
High performance engine lubricating oil for petrol engines (for API Service Category SJ) |
SANS 1516 |
|
|
66 |
High performance engine lubricating oil for diesel engines (for API Service Category CH-4) |
SANS 1517 |
|
|
67 |
Transport of dangerous goods — Design requirements for road vehicles and portable tanks |
SANS 15186 |
|
|
68 |
Road signs — Part 1: Retro-reflective sheeting material |
SANS 1519-1 |
|
|
69 |
Road signs — Part 2: Performance requirements for road signs |
SANS 1519-2 |
|
|
70 |
Motor vehicle tyres and rims — Dimensions and loads — Part 1: General |
SANS 1550-1 |
|
|
71 |
Motor vehicle tyres and rims — Dimensions and loads — Part 2: Passenger car tyres |
SANS 1550-2 |
|
|
72 |
Motor vehicle tyres and rims — Dimensions and loads — Part 3: Commercial vehicle tyres |
SANS 1550-3 |
|
|
73 |
Motor vehicle tyres and rims — Dimensions and loads — Part 4: Motorcycle and scooter tyres |
SANS 1550-4 |
|
|
74 |
Motor vehicle tyres and rims — Dimensions and loads — Part 5: Off-the-road vehicle tyres |
SANS 1550-5 |
|
|
75 |
Motor vehicle tyres and rims — Dimensions and loads — Part 6: Agricultural vehicle tyres |
SANS 1550-6 |
|
|
76 |
Motor vehicle tyres and rims — Dimensions and loads — Part 7: Industrial vehicle tyres |
SANS 1550-7 |
|
|
77 |
Motor vehicle tyres and rims — Dimensions and loads — Part 10: Rim contours |
SANS 1550-10 |
|
|
78 |
On-board computers for road transport |
SANS 1552 |
|
|
79 |
Tachograph recording equipment installed in road transport (excluding on-board computers) |
SANS 1558 |
|
|
80 |
The strength of large passenger vehicle superstructures (rollover protection) |
SANS 1563 |
|
|
81 |
The strength of seats (and their anchorages) of large passenger buses |
SANS 1564 |
|
|
82 |
Pneumatic tyres for passenger cars and trailers |
SANS 1565 |
|
|
83 |
Pneumatic tyres for commercial vehicles and trailers |
SANS 1566 |
|
|
84 |
Temporary-use spare wheels/tyres |
SANS 1577 |
|
|
85 |
Protection equipment for the front of motor vehicles |
SANS 1587 |
|
|
86 |
The braking performance of trackless underground mining vehicles — Load haul dumpers and dump trucks |
SANS 1589 |
|
|
87 |
Unleaded petrol |
SANS 1598 |
|
|
88 |
New replacement brake drums for motor vehicles |
SANS 1622 |
|
|
89 |
Warning lights |
SANS 1670 |
|
|
90 |
Safety aspects of canopies as fitted to category N1 and N2 motor vehicles |
SANS 1708 |
|
|
91 |
Lubricating grease |
SANS 1851 |
|
|
92 |
Hydraulic brake and clutch fluid (DOT 4 equivalent) |
SANS 1905 |
|
|
93 |
Portable refillable fire extinguishers |
SANS 1910 |
|
|
94 |
National modifications to SANS 20109: "Uniform provisions concerning the approval for the production of retreaded pneumatic tyres for commercial vehicles and their trailers" |
SANS 1925 |
|
|
95 |
Automotive biodiesel fuel |
SANS 1935 |
|
|
96 |
Road vehicles — Vehicle identification number (VIN) — Content and structure |
SANS 3779 |
|
|
97 |
Road vehicles — World manufacturer identifier (WMI) code |
SANS 3780 |
|
|
98 |
Road vehicles — Wheels/rims for commercial vehicles — Test methods |
SANS 3894 |
|
|
99 |
Road vehicles — Vehicle identification number (VIN) — Location and attachment |
SANS 4030 |
|
|
100 |
Road vehicles — Connectors for the electrical connection of towing and towed vehicles — Definitions, tests and requirements |
SANS 4091 |
|
|
101 |
Road vehicles — Elastomeric cups and seals for cylinders for hydraulic braking systems using a non-petroleum base hydraulic brake fluid (service temperature 120 °C max.) |
SANS 4928 |
|
|
102 |
Road vehicles — Elastomeric seals for hydraulic disc brake cylinders using a non-petroleum base hydraulic brake fluid (service temperature 150 °C max.) |
SANS 4930 |
|
|
103 |
The determination of performance (at net power) of internal combustion engines — Part 1: Road vehicle internal combustion engines at sea level |
SANS 10013-1 |
|
|
104 |
The determination of performance (at net power) of internal combustion engines — Part 2: Compression ignition engines at altitude |
SANS 10013-2 |
|
|
105 |
The determination of performance (at net power) of internal combustion engines — Part 3: Agricultural vehicle internal combustion engines at sea level |
SANS 10013-3 |
|
|
106 |
The testing of motor vehicles for roadworthiness |
SANS 10047 |
|
|
107 |
The measurement and assessment of occupational noise for hearing conservation purposes |
SANS 10083 |
|
|
108 |
Measurement and calibration systems |
SANS 10159 |
|
|
109 |
The installation of restraining devices (safety belts) in motor vehicles |
SANS 10168 |
|
|
110 |
Determining the performance of audible warning devices (hooters) after installation in a motor vehicle |
SANS 10169 |
|
|
111 |
The measurement of noise emitted by road vehicles when stationary |
SANS 10181 |
|
|
112 |
The measurement of noise emitted by motor vehicles in motion |
SANS 10205 |
|
|
113 |
The measurement of noise inside motor vehicles |
SANS 10211 |
|
|
114 |
Vehicle test station evaluation |
SANS 10216 |
|
|
115 |
The determination of performance (at net power) of industrial internal combustion engines — Part 1: Standard reference conditions and declarations of power, fuel consumption and lubricating oil consumption |
SANS 10219-1 |
|
|
116 |
The determination of performance (at net power) of industrial internal combustion engines — Part 2: Test methods |
SANS 10219-2 |
|
|
117 |
The determination of performance (at net power) of industrial internal combustion engines — Part 3: Test measurements |
SANS 10219-3 |
|
|
118 |
The determination of performance (at net power) of industrial internal combustion engines — Part 4: Speed governing |
SANS 10219-4 |
|
|
119 |
The determination of performance (at net power) of industrial internal combustion engines — Part 5: Torsional vibrations |
SANS 10219-5 |
|
|
120 |
The determination of performance (at net power) of industrial internal combustion engines — Part 6: Overspeed protection |
SANS 10219-6 |
|
|
121 |
The identification and classification of dangerous goods for transport |
SANS 10228 |
|
|
122 |
Transportation of dangerous goods — Operational requirements for road vehicles |
SANS 10231 |
|
|
123 |
Homologation of motor vehicle models |
SANS 10267 |
|
|
124 |
Engine speed (S values), reference sound levels and permissible sound levels of stationary road vehicles |
SANS 10281 |
|
|
125 |
The manufacture and reconditioning of replacement brake lining assemblies |
SANS 10310 |
|
|
126 |
The registration of manufacturers, importers and builders of categories M, N and O motor vehicles |
SANS 10319 |
|
|
127 |
Quality management systems — Requirements for bus operators |
SANS 10399 |
|
|
128 |
Repairs to tyres for motor vehicles |
SANS 10408 |
|
|
129 |
Road vehicles — Connectors for the electrical connection of towing and towed vehicles — 13-pole connectors for vehicles with 12 V nominal supply voltage |
SANS 11446 |
|
|
130 |
Road vehicles — Connectors for the electrical connection of towing and towed vehicles — 15-pole connector for vehicles with 24 V nominal supply voltage |
SANS 12098 |
|
|
131 |
Quality management systems — Particular requirements for the application of ISO 9001:2000 for automotive production and relevant service part organizations |
SANS 16949 |
|
|
132 |
General requirements for the competence of testing and calibration laboratories |
SANS 170254 |
|
|
133 |
Uniform provisions concerning the approval of motor vehicle headlamps emitting an asymmetrical passing beam and/or a driving beam and equipped with filament lamps of categories R2 and/or HS1 |
SANS 20001 |
|
|
134 |
Uniform provisions concerning the approval of retro-reflecting devices for power-driven vehicles and their trailers |
SANS 20003 |
|
|
135 |
Uniform provisions for the approval of devices for the illumination of rear registration plates of motor vehicles (except motor cycles) and their trailers |
SANS 20004 |
|
|
136 |
Uniform provisions for the approval of motor vehicle "sealed beam" headlamps (SB) emitting a European asymmetrical passing beam or a driving beam or both |
SANS 20005 |
|
|
137 |
Uniform provisions concerning the approval of direction indicators for motor vehicles and their trailers |
SANS 20006 |
|
|
138 |
Uniform provisions concerning the approval of front and rear position (side) lamps, stop-lamps and end-outline marker lamps for motor vehicles (except motorcycles) and their trailers |
SANS 20007 |
|
|
139 |
Uniform provisions concerning the approval of motor vehicle headlamps emitting an asymmetrical passing beam or a driving beam or both and equipped with halogen filament lamps (H1, H2, H3, HB3, HB4, H7, H8, H9, HIR1 and/or HIR2) |
SANS 20008 |
|
|
140 |
Uniform provisions concerning the approval of vehicles with regard to electromagnetic compatibility |
SANS 20010 |
|
|
141 |
Uniform provisions concerning the approval of vehicles with regard to door latches and door retention components |
SANS 20011 |
|
|
142 |
Uniform provisions concerning the approval of vehicles with regard to the protection of the driver against the steering mechanism in the event of impact |
SANS 20012 |
|
|
143 |
Uniform provisions concerning the approval of vehicles of categories M, N and O with regard to braking |
SANS 20013 |
|
|
144 |
Uniform provisions concerning the approval of passenger cars with regard to braking |
SANS 20013-H |
|
|
145 |
Uniform provisions concerning the approval of vehicles with regard to safety-belt anchorages |
SANS 20014 |
|
|
146 |
Uniform provisions concerning the approval of safety-belts and restraint systems for adult occupants of power-driven vehicles |
SANS 20016 |
|
|
147 |
Uniform provisions concerning the approval of vehicles with regard to the seats, their anchorages and any head restraints |
SANS 20017 |
|
|
148 |
Uniform provisions concerning the approval of motor vehicle front fog lamps |
SANS 20019 |
|
|
149 |
Uniform provisions concerning the approval of motor vehicle headlamps emitting an asymmetrical passing beam or a driving beam or both and equipped with halogen filament lamps (H4 lamps) |
SANS 20020 |
|
|
150 |
Uniform provisions concerning the approval of vehicles with regard to their interior fittings |
SANS 20021 |
|
|
151 |
Uniform provisions concerning the approval of protective helmets and of their visors for drivers and passengers of motor cycles and mopeds |
SANS 20022 |
|
|
152 |
Uniform provisions concerning the approval of reversing lamps for power-driven vehicles and their trailers |
SANS 20023 |
|
|
153 |
Uniform provisions for the approval of advance-warning triangles |
SANS 20027 |
|
|
154 |
Uniform provisions for the approval of audible warning devices and of motor vehicles with regard to their audible signals |
SANS 20028 |
|
|
155 |
Uniform provisions concerning the approval of halogen sealedbeam unit (HSB unit) motor vehicle headlamps emitting an asymmetrical passing beam or a driving beam or both |
SANS 20031 |
|
|
156 |
Uniform provisions concerning the approval of large passenger vehicles with regard to their general construction |
SANS 20036 |
|
|
157 |
Uniform provisions concerning the approval of filament lamps for use in approved lamp units of power driven vehicles and of their trailers |
SANS 20037 |
|
|
158 |
Uniform provisions concerning the approval of vehicles with regard to the speedometer equipment including its installation |
SANS 20039 |
|
|
159 |
Uniform provisions concerning the approval of motorcycles equipped with a positive-ignition engine with regard to the emission of gaseous pollutants by the engine |
SANS 20040 |
|
|
160 |
Uniform provisions concerning the approval of safety glazing materials |
SANS 20043 |
|
|
161 |
Uniform provisions concerning the approval of restraining devices for child occupants of power-driven vehicles ("child restraint system") |
SANS 200448 |
|
|
162 |
Uniform provisions concerning the approval of rear-view mirrors, and of motor vehicles with regard to the installation of rear-view mirrors |
SANS 20046 |
|
|
163 |
Uniform provisions concerning the approval of mopeds equipped with a positive-ignition engine with regard to the emission of gaseous pollutants by the engine |
SANS 20047 |
|
|
164 |
Uniform provisions concerning the approval of vehicles with regard to the installation of lighting and light-signalling devices |
SANS 20048 |
|
|
165 |
Uniform provisions concerning the approval of compression ignition (C.I.) and natural gas (NG) engines as well as positive ignition (P.I.) engines fuelled with liquefied petroleum gas (LPG) and vehicles equipped with C.I. and NG engines and P.I. engines fuelled with LPG, with regard to the emissions of pollutants by the engine |
SANS 20049 |
|
|
166 |
Uniform provisions concerning the approval of front position lamps, rear position lamps, stop lamps, direction indicators and rear-registration-plate illuminating devices for mopeds, motor cycles and vehicles treated as such |
SANS 20050 |
|
|
167 |
Uniform provisions concerning the approval of M2 and M3 small capacity vehicles with regard to their general construction |
SANS 20052 |
|
|
168 |
Uniform provisions concerning the approval of category L3 vehicles with regard to the installation of lighting and light signalling devices |
SANS 20053 |
|
|
169 |
Uniform provisions concerning the approval of mechanical coupling components of combinations of vehicles |
SANS 200556 |
|
|
170 |
Uniform provisions concerning the approval of headlamps for mopeds and vehicles treated as such |
SANS 20056 |
|
|
171 |
Uniform provisions concerning the approval of headlamps for motor cycles and vehicles treated as such |
SANS 20057 |
|
|
172 |
Uniform provisions concerning the approval of replacement silencing systems |
SANS 20059 |
|
|
173 |
Uniform provisions concerning the approval of two-wheeled motor cycles and mopeds with regard to driver-operated controls including the identification of controls, tell-tales and indicators |
SANS 20060 |
|
|
174 |
Uniform provisions concerning the approval of power-driven vehicles with handlebars with regard to their protection against unauthorized use |
SANS 20062 |
|
|
175 |
Uniform provisions concerning the approval of two-wheeled mopeds with regard to noise |
SANS 20063 |
|
|
176 |
Uniform provisions concerning the approval of special warning lamps for power-driven vehicles and their trailers |
SANS 20065 |
|
|
177 |
Uniform provisions concerning: I) approval of specific equipment of motor vehicles using liquefied petroleum gases in their propulsion system; II) approval of a vehicle fitted with specific equipment for the use of liquefied petroleum gases in its propulsion system with regard to the installation of such equipment |
SANS 20067 |
|
|
178 |
Uniform provisions concerning the approval of rear marking plates for slow-moving vehicles (by construction) and their trailers |
SANS 20069 |
|
|
179 |
Uniform provisions concerning the approval of rear marking plates for heavy and long vehicles |
SANS 20070 |
|
|
180 |
Uniform provisions concerning the approval of motor cycle headlamps emitting an asymmetrical passing beam and a driving beam and equipped with halogen filament lamps (HS1) |
SANS 20072 |
|
|
181 |
Uniform provisions concerning the approval of goods vehicles, trailers and semi-trailers with regard to their lateral protection |
SANS 20073 |
|
|
182 |
Uniform provisions concerning the approval of category L1 vehicles with regard to the installation of lighting and light signalling devices |
SANS 20074 |
|
|
183 |
Uniform provisions concerning the approval of pneumatic tyres for motor cycles and mopeds |
SANS 20075 |
|
|
184 |
Uniform provisions concerning the approval of headlamps for mopeds emitting a driving beam and a passing beam |
SANS 20076 |
|
|
185 |
Uniform provisions concerning the approval of vehicles of category L with regard to braking |
SANS 20078 |
|
|
186 |
Uniform provisions concerning the approval of seats of large passenger vehicles and of these vehicles with regard to the strength of the seats and their anchorages |
SANS 20080 |
|
|
187 |
Uniform provisions concerning the approval of rear-view mirrors and of two-wheeled power-driven vehicles with or without side car, with regard to the installation of rear-view mirrors on handlebars |
SANS 20081 |
|
|
188 |
Uniform provisions concerning the approval of moped headlamps equipped with filament halogen lamps (HS2 lamps) |
SANS 20082 |
|
|
189 |
Uniform provisions concerning the approval of vehicles with regard to the emission of pollutants according to engine fuel requirements |
SANS 20083 |
|
|
190 |
Uniform provisions concerning the approval of passenger cars equipped with an internal combustion engine with regard to measurement of fuel consumption |
SANS 20084 |
|
|
191 |
Uniform provisions concerning the approval of agricultural or forestry tractors with regard to the installation of lighting and light-signalling devices |
SANS 20086 |
|
|
192 |
Uniform provisions concerning the approval of daytime running lamps for power-driven vehicles |
SANS 20087 |
|
|
193 |
Uniform provisions concerning the approval of retroreflective tyres for two-wheeled vehicles |
SANS 20088 |
|
|
194 |
Uniform prescriptions for approval of: I. Vehicles with regard to limitation of their maximum speed or their adjustable speed limitation function; II. Vehicles with regard to the installation of a speed limiting device (SLD) or adjustable speed limitation device (ASLD) of an approved type;III. Speed limitation devices (SLD) and adjustable speed limitation device (ASLD) |
SANS 20089 |
|
|
195 |
Uniform provisions concerning the approval of replacement brake lining assemblies and drum brake linings for power-driven vehicles and their trailers |
SANS 20090 |
|
|
196 |
Uniform provisions concerning the approval of side-marker lamps for motor vehicles and their trailers |
SANS 20091 |
|
|
197 |
Uniform provisions concerning the approval of compression ignition (C.I.) engines to be installed in agricultural and forestry tractors and in non-road mobile machinery with regard to the emissions of pollutants by the engine |
SANS 20096 |
|
|
198 |
Uniform provisions concerning the approval of motor vehicle headlamps equipped with gas-discharge light sources |
SANS 20098 |
|
|
199 |
Uniform provisions concerning the approval of gas-discharge light sources for use in approved gas-discharge lamp units of power-driven vehicles |
SANS 20099 |
|
|
200 |
Uniform provisions concerning the approval of passenger cars powered by an internal combustion engine only, or powered by a hybrid electric power train with regard to the measurement of the emission of carbon dioxide and fuel consumption and/or the measurement of electric energy consumption and electric range, and of categories M1 and N1 vehicles powered by an electric power train only with regard to the measurement of electric energy consumption and electric range |
SANS 20101 |
|
|
201 |
Uniform provisions concerning the approval of retro-reflective markings for heavy and long vehicles and their trailers. |
SANS 20104 |
|
|
202 |
Uniform provisions concerning the approval of double-deck large passenger vehicles with regard to their general construction |
SANS 20107 |
|
|
203 |
Uniform provisions concerning the approval for the production of retreaded pneumatic tyres for motor vehicles and their trailers |
SANS 20108 |
|
|
204 |
Uniform provisions concerning the approval for the production of retreaded pneumatic tyres for commercial vehicles and their trailers |
SANS 20109 |
|
|
205 |
Uniform provisions concerning the approval of: |
SANS 20110 |
|
I. Specific components of motor vehicles using compressed natural gas (CNG) in their propulsion system;II. Vehicles with regard to the installation of specific components of an approved type for the use of compressed natural gas (CNG) in their propulsion system |
|
|
206 |
Uniform provisions concerning the approval of tank vehicles of categories N and O with regard to rollover stability |
SANS 20111 |
|
|
207 |
Uniform provisions concerning the approval of motor vehicle headlamps emitting an asymmetrical passing beam or a driving beam or both and equipped with filament lamps |
SANS 20112 |
|
|
208 |
Uniform provisions concerning the approval of wheels for passenger cars and their trailers |
SANS 20124 |
|
|
209 |
Industrial trucks — Specifications and test methods for operator restraint systems — Part 1: Lap-type seat belts |
SANS 24135-1 |
|
|
210 |
Lead-acid starter batteries — Part 1: General requirements and methods of test |
SANS 60095-1 |
|
|
211 |
Lead-acid starter batteries — Part 2: Dimensions of batteries and dimensions and marking of terminals |
SANS 60095-2 |
|
|
212 |
The care, maintenance and use of motor vehicle tyres and rims (incorporating TREDCO guidelines) |
ARP 007 |
|
|
213 |
Compulsory Specification for motor vehicles of category M1 |
VC 8022 |
|
|
214 |
Compulsory Specification for motor vehicles of category M2 and M3 |
VC 8023 |
|
|
215 |
Compulsory Specification for motor vehicles of category N1 |
VC 8024 |
|
|
216 |
Compulsory Specification for motor vehicles of category N2 and N3 |
VC 8025 |
|
|
217 |
Compulsory Specification for category O1 and O2 vehicles (caravans and light trailers) |
VC 8026 |
|
|
218 |
Compulsory Specification for category O3 and O4 vehicles (trailers) |
VC 8027 |
|
|
219 |
Compulsory Specification for child restraints for use in motor vehicles |
VC 8033 |
|
|
220 |
Compulsory Specification for replacement incandescent lamps for motor vehicles |
VC 8048 |
|
|
221 |
Compulsory Specification for replacement headlights for motor vehicles |
VC 8049 |
|
|
222 |
Compulsory Specification for replacement secondary lights for motor vehicles |
VC 8050 |
|
|
223 |
Compulsory Specification for replacement safety glass for use in road vehicles |
VC 8051 |
|
|
224 |
Compulsory Specification for replacement brake lining assemblies for road vehicles |
VC 8053 |
|
|
225 |
Compulsory Specification for pneumatic tyres for passenger cars and their trailers |
VC 8056 |
|
|
226 |
Compulsory Specification for slow speed vehicles |
VC 8057 |
|
|
227 |
Compulsory Specification for pneumatic tyres for commercial vehicles and their trailers |
VC 8059 |
|
|
228 |
Compulsory Specification for retro-reflective number plates for motor vehicles |
VC 8062 |
|
|
229 |
Compulsory Specification for ball type couplings and towing brackets for towing caravans and light trailers |
VC 8065 |
|
|
230 |
Compulsory Specification for material for contour marking on motor vehicles |
VC 8078 |
|
|
231 |
Compulsory Specification for replacement elastomeric cups and seals for hydraulic brake actuating cylinders for use in motor vehicles using non-petroleum base hydraulic brake fluid (service temperature 70 °C to 150 °C max) |
VC 8080 |
|
|
232 |
Standards Act, 1993 (Act 29 of 1993) |
Standards Act |
|
|